FRONT UPPER SUSPENSION ARM DISASSEMBLY


  1. REMOVE FRONT SUSPENSION UPPER ARM BUSH LH

    Tech Tips

    Use the same procedure for the front and rear sides.


    1. A01DTFK

      Using a hammer and chisel, strike and bend the entire flange of the upper arm bush as shown in the illustration.

    2. A01DS5YE02

      Using SST and a press, press out the bush.

      SST
      09613-26010
      09710-22021   ( 09710-01031 )
      09950-00020

  2. REMOVE FRONT UPPER BALL JOINT DUST COVER LH


    1. A01DOTH

      Using a snap ring expander, remove the dust cover set ring and dust cover from the upper arm.

      Note


      • Do not damage the ball joint dust cover.

      • If the ball joint dust cover is damaged, replace it.