FRONT SHOCK ABSORBER DISASSEMBLY


  1. REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT


    1. A01DQBAE02

      Secure SST in a vise.

      SST
      09727-30022   ( 09727-00010, 09727-00031 )
      09727-00060
    2. A01DR5IE04
      Text in Illustration
      *a Correct
      *b Incorrect

      Attach the arm of SST to the diameter of the coil spring.

      CAUTION:


      • Make sure that the coil spring is installed so that the distance between the upper and lower hooks of SST is at the maximum.

      • Make sure that the claws of the hooks are securely attached.

    3. Using SST, compress the coil spring.

      CAUTION:


      • If the coil spring bends during the compression, immediately stop the compression and reinstall SST.

      • Do not compress the spring until the coil springs contact each other.

      • Do not use an impact wrench.

    4. A01DPOZ

      Remove the front support to front shock absorber nut.

      CAUTION:

      Do not remove the front support to front shock absorber nut when the coil spring is not free.

  2. REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY LH


    1. Remove the suspension support, cushion and 2 retainers from the shock absorber rod.

  3. REMOVE FRONT COIL SPRING LH


    1. Remove the coil spring from the shock absorber.

  4. REMOVE FRONT SHOCK ABSORBER BUSH


    1. A01DSP7E01

      Using SST and a press, remove the absorber bush.

      SST
      09710-30012   ( 09710-04071, 09710-04081 )