Click here

ABSORBER CONTROL ACTUATOR INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL SUSPENSION CONTROL BRACKET LH


    1. Using SST, install the bracket with the nut.

      09961-00950
      15 N*m 153 kgf*cm 11 ft.*lbf
  2. Click here

    INSTALL ABSORBER CONTROL ACTUATOR LH


    1. Using a hexagon wrench (4 mm), install the absorber control actuator with the 2 hexagon socket head cap bolts.

      7.8 N*m 80 kgf*cm 69 in.*lbf
      Note:

      Replace the absorber control actuator with a new one if it is dropped.

    2. Connect the connector, and then attach the 3 clamps.

      Note:

      Securely connect the connector.

  3. Click here

    INSTALL FRONT WHEEL

    112 N*m 1142 kgf*cm 83 ft.*lbf
  4. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).