ABSORBER CONTROL ACTUATOR INSTALLATION


  1. INSTALL SUSPENSION CONTROL BRACKET LH


    1. Using SST, install the bracket with the nut.

      SST
      09961-00950
      Torque:
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

  2. INSTALL ABSORBER CONTROL ACTUATOR LH


    1. Using a hexagon wrench (4 mm), install the absorber control actuator with the 2 hexagon socket head cap bolts.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }

      Note

      Replace the absorber control actuator with a new one if it is dropped.

    2. Connect the connector, and then attach the 3 clamps.

      Note

      Securely connect the connector.

  3. INSTALL FRONT WHEEL

    Torque:
    112 N*m  { 1142 kgf*cm, 83 ft.*lbf }

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.