FRONT STABILIZER BAR (w/o KDSS) REMOVAL


  1. REMOVE FRONT WHEEL

  2. REMOVE LOWER FRONT BUMPER COVER


    1. Remove the clip, 5 bolts and front bumper cover lower.

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    1. Remove the 4 bolts.

    2. A01DQWQ

      Unhook the engine under cover from the vehicle body as shown in the illustration.

  4. REMOVE FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY


    1. A01DU2C

      Remove the 6 bolts and 2 member braces from the front frame assembly.

  5. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. A01DMVJ

      Remove the 2 nuts and front stabilizer link assembly LH.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

  6. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. REMOVE FRONT NO. 1 STABILIZER BRACKET LH


    1. A01DUGO

      Remove the 2 bolts and front No. 1 stabilizer bracket LH.

  8. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. REMOVE FRONT NO. 1 STABILIZER BAR BUSH


    1. Remove the 2 front No. 1 stabilizer bar bushes.

  10. REMOVE FRONT STABILIZER BAR