Click here

STABILIZER CONTROL ECU INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL STABILIZER CONTROL ECU


    1. Install the stabilizer control ECU with the bolt.

      14 N*m 138 kgf*cm 10 ft.*lbf
      Note:

      • Replace the stabilizer control ECU with a new one if it is dropped.

      • Make sure the bracket rotation stopper touches the installation position.

    2. Connect the connector.

      Note:

      Securely connect the connector.

  2. Click here

    INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    (Click here)

  3. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).