STABILIZER CONTROL ECU INSTALLATION


  1. INSTALL STABILIZER CONTROL ECU


    1. Install the stabilizer control ECU with the bolt.

      Torque:
      14 N*m  { 138 kgf*cm, 10 ft.*lbf }

      Note


      • Replace the stabilizer control ECU with a new one if it is dropped.

      • Make sure the bracket rotation stopper touches the installation position.

    2. Connect the connector.

      Note

      Securely connect the connector.

  2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.