SUSPENSION CONTROL SYSTEM (w/ Air Suspension) ON-VEHICLE INSPECTION


  1. INSPECT TIRES


    1. Check the tires for wear and proper inflation pressure.

      Cold Tire Inflation Pressure (for Europe)
      Tire Size

      Front

      kPa (kgf/cm2, psi)

      Rear

      kPa (kgf/cm2, psi)
      P245/70R17 108S 220 (2.2, 32) 220 (2.2, 32)
      245/70R17 110S 220 (2.2, 32) 220 (2.2, 32)
      P265/65R17 110S 220 (2.2, 32) 220 (2.2, 32)
      265/65R17 112S 220 (2.2, 32) 220 (2.2, 32)
      P265/60R18 109H 220 (2.2, 32) 220 (2.2, 32)
      265/60R18 110H 220 (2.2, 32) 220 (2.2, 32)
      Cold Tire Inflation Pressure (for Eastern Europe and Russia)
      Tire Size

      Front

      kPa (kgf/cm2, psi)

      Rear

      kPa (kgf/cm2, psi)
      245/70R17 110S 200 (2.0, 29) 200 (2.0, 29)
      265/65R17 112S 200 (2.0, 29) 200 (2.0, 29)
      265/60R18 110H 200 (2.0, 29) 200 (2.0, 29)
      Cold Tire Inflation Pressure (for General Export, Australia, G.C.C.)
      Tire Size

      Front

      kPa (kgf/cm2, psi)

      Rear

      kPa (kgf/cm2, psi)
      245/70R17 110S 200 (2.0, 29) 200 (2.0, 29)
      265/65R17 112S 200 (2.0, 29) 200 (2.0, 29)
      265/60R18 110H 200 (2.0, 29) 200 (2.0, 29)
    2. A01DOPG

      Using a dial indicator, check the tire runout.

      Standard tire runout
      2.0 mm (0.0787 in.) or less

  2. ADJUST STANDARD VEHICLE HEIGHT


    1. Release the parking brake and stabilize the suspension by bouncing the corners of the vehicle.

    2. With the shift lever in N, settle the tires by moving the vehicle back and forth.

    3. Start the engine.

    4. Operate the height control switch to raise and then lower the vehicle height. Perform this operation twice.

      Note

      Be sure to release the parking brake and move the shift lever to N.

  3. INSPECT VEHICLE HEIGHT

    Note

    Before inspecting the wheel alignment, adjust the vehicle height to the specification.


    1. A01DOKDE03
      Text in Illustration
      *a Front Side
      *b Rear Side

      Press down on the vehicle several times to stabilize the suspension, and then measure the vehicle height.

      Standard Vehicle Height (Unloaded Vehicle)
      Vehicle Model Grade Seating Capacity Item Front (A - B) Rear (C - D)
      KDJ150L-GKAEY TX 5 - Seater - 80.0 mm (3.15 in.) 54.8 mm (2.16 in.)
      for Double Tank Type 79.0 mm (3.11 in.) 57.1 mm (2.25 in.)
      7 - Seater - 81.0 mm (3.19 in.) 56.0 mm (2.20 in.)
      for Double Tank Type 80.0 mm (3.15 in.) 58.0 mm (2.28 in.)
      9 - Seater - 79.9 mm (3.15 in.) 54.3 mm (2.14 in.)
      for Double Tank Type 79.0 mm (3.11 in.) 56.4 mm (2.22 in.)
      TXL 5 - Seater - 80.7 mm (3.18 in.) 56.6 mm (2.23 in.)
      for Double Tank Type 79.8 mm (3.14 in.) 58.7 mm (2.31 in.)
      7 - Seater - 81.7 mm (3.22 in.) 57.7 mm (2.27 in.)
      for Double Tank Type 80.8 mm (3.18 in.) 59.7 mm (2.35 in.)
      9 - Seater - 80.7 mm (3.18 in.) 56.0 mm (2.20 in.)
      for Double Tank Type 79.8 mm (3.14 in.) 58.1 mm (2.29 in.)
      VX 5 - Seater for KDSS 78.4 mm (3.09 in.) 57.1 mm (2.25 in.)
      for Conventional Suspension 81.3 mm (3.20 in.) 55.6 mm (2.19 in.)
      for Double Tank Type with KDSS 77.5 mm (3.05 in.) 59.0 mm (2.32 in.)
      for Double Tank Type with Conventional Suspension 80.4 mm (3.17 in.) 57.6 mm (2.27 in.)
      7 - Seater for KDSS 79.4 mm (3.13 in.) 58.0 mm (2.28 in.)
      for Conventional Suspension 82.4 mm (3.24 in.) 56.8 mm (2.24 in.)
      for Double Tank Type with KDSS 78.6 mm (3.09 in.) 59.0 mm (2.32 in.)
      for Double Tank Type with Conventional Suspension 81.5 mm (3.21 in.) 57.7 mm (2.27 in.)
      VXL 7 - Seater - 78.0 mm (3.07 in.) 65.7 mm (2.59 in.)
      for Double Tank Type 77.4 mm (3.05 in.) 65.3 mm (2.57 in.)
      KDJ150L-GKFEY TX 5 - Seater - 78.8 mm (3.10 in.) 54.6 mm (2.15 in.)
      for Double Tank Type 77.8 mm (3.06 in.) 56.8 mm (2.24 in.)
      7 - Seater - 79.8 mm (3.14 in.) 55.7 mm (2.19 in.)
      for Double Tank Type 78.9 mm (3.11 in.) 57.8 mm (2.28 in.)
      9 - Seater - 78.7 mm (3.10 in.) 54.0 mm (2.13 in.)
      for Double Tank Type 77.8 mm (3.06 in.) 56.1 mm (2.21 in.)
      TXL 5 - Seater - 79.8 mm (3.14 in.) 56.1 mm (2.21 in.)
      for Double Tank Type 78.9 mm (3.11 in.) 58.3 mm (2.30 in.)
      7 - Seater - 79.7 mm (3.14 in.) 57.0 mm (2.24 in.)
      for Double Tank Type 78.7 mm (3.10 in.) 58.9 mm (2.32 in.)
      9 - Seater - 79.8 mm (3.14 in.) 55.5 mm (2.19 in.)
      for Double Tank Type 78.9 mm (3.11 in.) 57.6 mm (2.27 in.)
      VX 5 - Seater for KDSS 77.3 mm (3.04 in.) 56.3 mm (2.22 in.)
      for Conventional Suspension 80.2 mm (3.16 in.) 54.9 mm (2.16 in.)
      for Double Tank Type with KDSS 76.4 mm (3.01 in.) 58.3 mm (2.30 in.)
      for Double Tank Type with Conventional Suspension 79.3 mm (3.12 in.) 56.9 mm (2.24 in.)
      7 - Seater for KDSS 78.3 mm (3.08 in.) 57.3 mm (2.26 in.)
      for Conventional Suspension 81.2 mm (3.20 in.) 56.0 mm (2.20 in.)
      for Double Tank Type with KDSS 77.5 mm (3.05 in.) 58.2 mm (2.29 in.)
      for Double Tank Type with Conventional Suspension 80.4 mm (3.17 in.) 56.9 mm (2.24 in.)
      KDJ150R-GKAEY TX 5 - Seater - 76.4 mm (3.01 in.) 54.1 mm (2.13 in.)
      for Double Tank Type 75.5 mm (2.97 in.) 56.3 mm (2.22 in.)
      7 - Seater - 77.4 mm (3.05 in.) 55.2 mm (2.17 in.)
      for Double Tank Type 76.5 mm (3.01 in.) 57.3 mm (2.26 in.)
      9 - Seater - 76.4 mm (3.01 in.) 53.5 mm (2.11 in.)
      for Double Tank Type 75.5 mm (2.97 in.) 55.6 mm (2.19 in.)
      TXL 5 - Seater - 77.4 mm (3.05 in.) 56.2 mm (2.21 in.)
      for Double Tank Type 76.5 mm (3.01 in.) 58.2 mm (2.29 in.)
      7 - Seater - 78.4 mm (3.09 in.) 57.3 mm (2.26 in.)
      for Double Tank Type 77.5 mm (3.05 in.) 59.2 mm (2.33 in.)
      9 - Seater - 77.4 mm (3.05 in.) 55.5 mm (2.19 in.)
      for Double Tank Type 76.5 mm (3.01 in.) 57.5 mm (2.26 in.)
      VX 5 - Seater for KDSS 79.2 mm (3.12 in.) 57.3 mm (2.26 in.)
      for Conventional Suspension 78.1 mm (3.07 in.) 55.0 mm (2.17 in.)
      for Double Tank Type with KDSS 78.3 mm (3.08 in.) 59.3 mm (2.33 in.)
      for Double Tank Type with Conventional Suspension 77.1 mm (3.04 in.) 57.0 mm (2.24 in.)
      7 - Seater for KDSS 80.2 mm (3.16 in.) 58.3 mm (2.30 in.)
      for Conventional Suspension 79.1 mm (3.11 in.) 56.1 mm (2.21 in.)
      for Double Tank Type with KDSS 79.4 mm (3.13 in.) 59.2 mm (2.33 in.)
      for Double Tank Type with Conventional Suspension 78.3 mm (3.08 in.) 57.0 mm (2.24 in.)
      VXL 7 - Seater - 78.9 mm (3.11 in.) 65.9 mm (2.59 in.)
      for Double Tank Type 78.2 mm (3.08 in.) 65.5 mm (2.58 in.)
      KDJ150R-GKFEY TX 5 - Seater - 75.5 mm (2.97 in.) 53.8 mm (2.12 in.)
      for Double Tank Type 74.6 mm (2.94 in.) 56.1 mm (2.21 in.)
      7 - Seater - 76.5 mm (3.01 in.) 55.1 mm (2.17 in.)
      for Double Tank Type 75.6 mm (2.98 in.) 57.1 mm (2.25 in.)
      TXL 5 - Seater - 77.4 mm (3.05 in.) 56.0 mm (2.20 in.)
      for Double Tank Type 76.5 mm (3.01 in.) 58.0 mm (2.28 in.)
      7 - Seater - 78.5 mm (3.09 in.) 57.1 mm (2.25 in.)
      for Double Tank Type 77.6 mm (3.06 in.) 59.0 mm (2.32 in.)
      VX 5 - Seater for KDSS 79.2 mm (3.12 in.) 57.3 mm (2.26 in.)
      for Conventional Suspension 78.1 mm (3.07 in.) 55.0 mm (2.17 in.)
      for Double Tank Type with KDSS 78.3 mm (3.08 in.) 59.3 mm (2.33 in.)
      for Double Tank Type with Conventional Suspension 77.1 mm (3.04 in.) 57.0 mm (2.24 in.)
      7 - Seater for KDSS 80.2 mm (3.16 in.) 58.3 mm (2.30 in.)
      for Conventional Suspension 79.1 mm (3.11 in.) 56.1 mm (2.21 in.)
      for Double Tank Type with KDSS 79.4 mm (3.13 in.) 59.2 mm (2.33 in.)
      for Double Tank Type with Conventional Suspension 78.3 mm (3.08 in.) 57.0 mm (2.24 in.)
      GRJ150L-GKAEK TX 5 - Seater - 79.4 mm (3.13 in.) 54.2 mm (2.13 in.)
      for Double Tank Type 78.4 mm (3.09 in.) 55.8 mm (2.20 in.)
      7 - Seater - 80.5 mm (3.17 in.) 55.4 mm (2.18 in.)
      for Double Tank Type 79.5 mm (3.13 in.) 56.9 mm (2.24 in.)
      9 - Seater - 79.3 mm (3.12 in.) 53.6 mm (2.11 in.)
      for Double Tank Type 78.4 mm (3.09 in.) 55.2 mm (2.17 in.)
      TXL 5 - Seater - 80.8 mm (3.18 in.) 55.8 mm (2.20 in.)
      for Double Tank Type 79.9 mm (3.15 in.) 57.5 mm (2.26 in.)
      7 - Seater - 81.9 mm (3.22 in.) 57.0 mm (2.24 in.)
      for Double Tank Type 81.0 mm (3.19 in.) 58.5 mm (2.30 in.)
      9 - Seater - 80.8 mm (3.18 in.) 55.2 mm (2.17 in.)
      for Double Tank Type 79.9 mm (3.15 in.) 56.8 mm (2.24 in.)
      VX 5 - Seater for KDSS 79.4 mm (3.13 in.) 56.5 mm (2.22 in.)
      for Conventional Suspension 81.2 mm (3.20 in.) 54.8 mm (2.16 in.)
      for Double Tank Type with KDSS 78.5 mm (3.09 in.) 58.1 mm (2.29 in.)
      for Double Tank Type with Conventional Suspension 80.3 mm (3.16 in.) 56.5 mm (2.22 in.)
      7 - Seater for KDSS 80.5 mm (3.17 in.) 57.6 mm (2.27 in.)
      for Conventional Suspension 82.3 mm (3.24 in.) 56.0 mm (2.20 in.)
      for Double Tank Type with KDSS 79.7 mm (3.14 in.) 58.0 mm (2.28 in.)
      for Double Tank Type with Conventional Suspension 81.5 mm (3.21 in.) 56.5 mm (2.22 in.)
      VXL 7 - Seater - 79.1 mm (3.11 in.) 65.7 mm (2.59 in.)
      for Double Tank Type 78.4 mm (3.09 in.) 65.2 mm (2.57 in.)
      GRJ150L-GKFEK TX 5 - Seater - 78.4 mm (3.09 in.) 53.9 mm (2.12 in.)
      for Double Tank Type 77.4 mm (3.05 in.) 55.6 mm (2.19 in.)
      7 - Seater - 79.5 mm (3.13 in.) 55.1 mm (2.17 in.)
      for Double Tank Type 78.6 mm (3.09 in.) 56.7 mm (2.23 in.)
      9 - Seater - 78.4 mm (3.09 in.) 53.3 mm (2.10 in.)
      for Double Tank Type 77.4 mm (3.05 in.) 55.0 mm (2.17 in.)
      TXL 5 - Seater - 79.9 mm (3.15 in.) 55.3 mm (2.18 in.)
      for Double Tank Type 78.9 mm (3.11 in.) 57.2 mm (2.25 in.)
      7 - Seater - 81.0 mm (3.19 in.) 56.5 mm (2.22 in.)
      for Double Tank Type 80.1 mm (3.15 in.) 58.0 mm (2.28 in.)
      9 - Seater - 79.9 mm (3.15 in.) 54.7 mm (2.15 in.)
      for Double Tank Type 78.9 mm (3.11 in.) 56.3 mm (2.22 in.)
      VX 5 - Seater for KDSS 78.2 mm (3.08 in.) 55.7 mm (2.19 in.)
      for Conventional Suspension 79.9 mm (3.15 in.) 54.0 mm (2.13 in.)
      for Double Tank Type with KDSS 77.3 mm (3.04 in.) 57.2 mm (2.25 in.)
      for Double Tank Type with Conventional Suspension 78.9 mm (3.11 in.) 56.5 mm (2.22 in.)
      7 - Seater for KDSS 79.3 mm (3.12 in.) 56.7 mm (2.23 in.)
      for Conventional Suspension 81.0 mm (3.19 in.) 55.1 mm (2.17 in.)
      for Double Tank Type with KDSS 78.5 mm (3.09 in.) 57.3 mm (2.26 in.)
      for Double Tank Type with Conventional Suspension 80.2 mm (3.16 in.) 55.7 mm (2.19 in.)
      LJ150L-GKMEE TX 5 - Seater - 80.0 mm (3.15 in.) 54.8 mm (2.16 in.)
      for Double Tank Type 79.1 mm (3.11 in.) 57.0 mm (2.24 in.)
      7 - Seater - 81.1 mm (3.19 in.) 56.0 mm (2.20 in.)
      for Double Tank Type 80.1 mm (3.15 in.) 58.0 mm (2.28 in.)
      9 - Seater - 80.0 mm (3.15 in.) 53.7 mm (2.11 in.)
      for Double Tank Type 79.1 mm (3.11 in.) 55.9 mm (2.20 in.)
      10 - Seater - 79.4 mm (3.13 in.) 53.6 mm (2.11 in.)
      for Double Tank Type 78.5 mm (3.09 in.) 55.7 mm (2.19 in.)
      TXL 5 - Seater - 80.6 mm (3.17 in.) 57.9 mm (2.28 in.)
      for Double Tank Type 79.7 mm (3.14 in.) 59.9 mm (2.36 in.)
      7 - Seater - 81.7 mm (3.22 in.) 58.9 mm (2.32 in.)
      for Double Tank Type 80.8 mm (3.18 in.) 60.8 mm (2.39 in.)
      9 - Seater - 80.7 mm (3.18 in.) 56.6 mm (2.23 in.)
      for Double Tank Type 79.7 mm (3.14 in.) 58.6 mm (2.31 in.)
      10 - Seater - 80.1 mm (3.15 in.) 56.5 mm (2.22 in.)
      for Double Tank Type 79.1 mm (3.11 in.) 58.5 mm (2.30 in.)
      LJ150R-GKMEE TX 5 - Seater - 82.2 mm (3.24 in.) 54.7 mm (2.15 in.)
      for Double Tank Type 81.2 mm (3.20 in.) 56.9 mm (2.24 in.)
      7 - Seater - 83.3 mm (3.28 in.) 55.9 mm (2.20 in.)
      for Double Tank Type 82.3 mm (3.24 in.) 58.0 mm (2.28 in.)
      9 - Seater - 82.2 mm (3.24 in.) 53.7 mm (2.11 in.)
      for Double Tank Type 81.3 mm (3.20 in.) 55.6 mm (2.19 in.)
      10 - Seater - 81.6 mm (3.21 in.) 53.6 mm (2.11 in.)
      for Double Tank Type 80.7 mm (3.18 in.) 55.0 mm (2.17 in.)
      TXL 5 - Seater - 82.5 mm (3.25 in.) 57.7 mm (2.27 in.)
      for Double Tank Type 81.6 mm (3.21 in.) 59.7 mm (2.35 in.)
      7 - Seater - 83.6 mm (3.29 in.) 58.8 mm (2.31 in.)
      for Double Tank Type 82.6 mm (3.25 in.) 60.6 mm (2.39 in.)
      9 - Seater - 82.6 mm (3.25 in.) 56.5 mm (2.22 in.)
      for Double Tank Type 81.9 mm (3.22 in.) 58.6 mm (2.31 in.)
      10 - Seater - 81.9 mm (3.22 in.) 56.4 mm (2.22 in.)
      for Double Tank Type 81.3 mm (3.20 in.) 58.4 mm (2.30 in.)
      TRJ150L-GKPEK TX 5 - Seater - 81.1 mm (3.19 in.) 53.8 mm (2.12 in.)
      for Double Tank Type 80.1 mm (3.15 in.) 55.5 mm (2.19 in.)
      7 - Seater - 82.2 mm (3.24 in.) 55.0 mm (2.17 in.)
      for Double Tank Type 81.3 mm (3.20 in.) 56.7 mm (2.23 in.)
      9 - Seater - 81.1 mm (3.19 in.) 53.1 mm (2.09 in.)
      TXL 5 - Seater - 82.1 mm (3.23 in.) 56.4 mm (2.22 in.)
      for Double Tank Type 81.2 mm (3.20 in.) 58.0 mm (2.28 in.)
      7 - Seater - 83.3 mm (3.28 in.) 57.6 mm (2.27 in.)
      for Double Tank Type 82.4 mm (3.24 in.) 59.1 mm (2.33 in.)
      9 - Seater - 82.2 mm (3.24 in.) 55.3 mm (2.18 in.)
      VX 5 - Seater - 83.8 mm (3.30 in.) 53.0 mm (2.09 in.)
      for Double Tank Type 83.8 mm (3.30 in.) 54.7 mm (2.15 in.)
      7 - Seater - 83.9 mm (3.30 in.) 54.2 mm (2.13 in.)
      for Double Tank Type 83.1 mm (3.27 in.) 54.8 mm (2.16 in.)
      TRJ150L-GKMEK TX 5 - Seater - 81.3 mm (3.20 in.) 54.7 mm (2.15 in.)
      for Double Tank Type 80.3 mm (3.16 in.) 56.3 mm (2.22 in.)
      7 - Seater - 82.5 mm (3.25 in.) 55.9 mm (2.20 in.)
      for Double Tank Type 81.5 mm (3.21 in.) 57.4 mm (2.26 in.)
      9 - Seater - 81.3 mm (3.20 in.) 53.8 mm (2.12 in.)
      TXL 5 - Seater - 82.1 mm (3.23 in.) 57.2 mm (2.25 in.)
      for Double Tank Type 81.1 mm (3.19 in.) 58.8 mm (2.31 in.)
      7 - Seater - 83.3 mm (3.28 in.) 57.8 mm (2.28 in.)
      for Double Tank Type 82.3 mm (3.24 in.) 59.3 mm (2.33 in.)
      9 - Seater - 82.1 mm (3.23 in.) 56.0 mm (2.20 in.)
      VX 5 - Seater - 83.7 mm (3.30 in.) 53.7 mm (2.11 in.)
      for Double Tank Type 83.8 mm (3.30 in.) 55.3 mm (2.18 in.)
      7 - Seater - 83.9 mm (3.30 in.) 54.5 mm (2.15 in.)
      for Double Tank Type 83.1 mm (3.27 in.) 55.1 mm (2.17 in.)
      KDJ150L-GKAEYW TX 2 - Seater - 82.0 mm (3.23 in.) 53.3 mm (2.10 in.)
      5 - Seater - 83.1 mm (3.27 in.) 56.4 mm (2.22 in.)
      EURO 4 80.8 mm (3.18 in.) 55.8 mm (2.20 in.)
      N1 83.1 mm (3.27 in.) 56.4 mm (2.22 in.)
      Spare Tire Less 79.4 mm (3.13 in.) 51.3 mm (2.02 in.)
      7 - Seater - 84.2 mm (3.31 in.) 57.6 mm (2.27 in.)
      EURO 4 81.8 mm (3.22 in.) 57.0 mm (2.24 in.)
      TXL 2 - Seater - 82.7 mm (3.26 in.) 54.7 mm (2.15 in.)
      5 - Seater - 83.6 mm (3.29 in.) 58.1 mm (2.29 in.)
      EURO 4 81.2 mm (3.20 in.) 57.5 mm (2.26 in.)
      for KDSS 81.8 mm (3.22 in.) 55.8 mm (2.20 in.)

      for KDSS

      (EURO 4)

      		 79.5 mm (3.13 in.) 55.2 mm (2.17 in.)
      N1 83.6 mm (3.29 in.) 58.1 mm (2.29 in.)
      7 - Seater - 84.6 mm (3.33 in.) 59.2 mm (2.33 in.)
      EURO 4 82.2 mm (3.24 in.) 58.6 mm (2.31 in.)
      for KDSS 79.3 mm (3.12 in.) 56.5 mm (2.22 in.)

      for KDSS

      (EURO 4)

      		 80.5 mm (3.17 in.) 56.4 mm (2.22 in.)
      VX 2 - Seater - 82.1 mm (3.23 in.) 59.4 mm (2.34 in.)
      5 - Seater - 82.7 mm (3.26 in.) 58.8 mm (2.31 in.)
      EURO 4 80.4 mm (3.17 in.) 58.2 mm (2.29 in.)
      for Conventional Suspension 84.8 mm (3.34 in.) 57.0 mm (2.24 in.)

      for Conventional Suspension

      (EURO 4)

      		 82.5 mm (3.25 in.) 56.4 mm (2.22 in.)
      N1 82.7 mm (3.26 in.) 58.8 mm (2.31 in.)

      for Conventional Suspension

      (N1)

      		 85.1 mm (3.35 in.) 57.1 mm (2.25 in.)
      7 - Seater - 83.7 mm (3.30 in.) 59.7 mm (2.35 in.)
      EURO 4 81.4 mm (3.20 in.) 59.1 mm (2.33 in.)
      for Conventional Suspension 85.9 mm (3.38 in.) 58.1 mm (2.29 in.)

      for Conventional Suspension

      (EURO 4)

      		 83.5 mm (3.29 in.) 57.5 mm (2.26 in.)
      VXL 2 - Seater - 81.4 mm (3.20 in.) 67.0 mm (2.64 in.)
      5 - Seater - 81.9 mm (3.22 in.) 67.0 mm (2.64 in.)
      EURO 4 79.6 mm (3.13 in.) 66.4 mm (2.61 in.)
      N1 81.9 mm (3.22 in.) 67.0 mm (2.64 in.)
      7 - Seater - 83.0 mm (3.27 in.) 67.0 mm (2.64 in.)
      EURO 4 80.7 mm (3.18 in.) 66.4 mm (2.61 in.)
      KDJ150L-GKFEYW TX 2 - Seater - 80.8 mm (3.18 in.) 52.9 mm (2.08 in.)
      5 - Seater - 81.9 mm (3.22 in.) 56.1 mm (2.21 in.)
      EURO 4 79.9 mm (3.15 in.) 55.6 mm (2.19 in.)
      N1 81.9 mm (3.22 in.) 56.1 mm (2.21 in.)
      Spare Tire Less 78.2 mm (3.08 in.) 51.0 mm (2.01 in.)
      7 - Seater - 83.0 mm (3.27 in.) 57.3 mm (2.26 in.)
      EURO 4 80.9 mm (3.19 in.) 56.7 mm (2.23 in.)
      TXL 2 - Seater - 81.5 mm (3.21 in.) 54.5 mm (2.15 in.)
      5 - Seater - 82.4 mm (3.24 in.) 57.9 mm (2.28 in.)
      EURO 4 80.6 mm (3.17 in.) 57.4 mm (2.26 in.)
      for KDSS 80.7 mm (3.18 in.) 55.3 mm (2.18 in.)

      for KDSS

      (EURO 4)

      		 78.9 mm (3.11 in.) 55.1 mm (2.17 in.)
      N1 82.4 mm (3.24 in.) 57.9 mm (2.28 in.)
      7 - Seater - 83.4 mm (3.28 in.) 58.9 mm (2.32 in.)
      EURO 4 81.6 mm (3.21 in.) 58.4 mm (2.30 in.)
      for KDSS 81.7 mm (3.22 in.) 56.6 mm (2.23 in.)

      for KDSS

      (EURO 4)

      		 79.9 mm (3.15 in.) 56.1 mm (2.21 in.)
      VX 5 - Seater - 81.5 mm (3.21 in.) 58.4 mm (2.30 in.)
      EURO 4 79.3 mm (3.12 in.) 57.4 mm (2.26 in.)
      for Conventional Suspension 83.6 mm (3.29 in.) 56.7 mm (2.23 in.)

      for Conventional Suspension

      (EURO 4)

      		 81.3 mm (3.20 in.) 55.6 mm (2.19 in.)
      N1 81.5 mm (3.21 in.) 58.4 mm (2.30 in.)

      for Conventional Suspension

      (N1)

      		 84.2 mm (3.31 in.) 56.9 mm (2.24 in.)
      7 - Seater - 82.5 mm (3.25 in.) 59.4 mm (2.34 in.)
      EURO 4 80.0 mm (3.15 in.) 58.3 mm (2.30 in.)
      for Conventional Suspension 84.7 mm (3.33 in.) 57.8 mm (2.28 in.)

      for Conventional Suspension

      (EURO 4)

      		 82.3 mm (3.24 in.) 56.7 mm (2.23 in.)
      KDJ150R-GKAEYW TX 2 - Seater - 78.7 mm (3.10 in.) 52.5 mm (2.07 in.)
      5 - Seater - 79.9 mm (3.15 in.) 55.8 mm (2.20 in.)
      EURO 4 77.5 mm (3.05 in.) 55.2 mm (2.17 in.)
      N1 79.9 mm (3.15 in.) 55.8 mm (2.20 in.)
      Spare Tire Less 76.2 mm (3.00 in.) 50.5 mm (1.99 in.)
      7 - Seater - 80.9 mm (3.19 in.) 56.9 mm (2.24 in.)
      EURO 4 78.5 mm (3.09 in.) 56.3 mm (2.22 in.)
      TXL 2 - Seater - 79.5 mm (3.13 in.) 54.1 mm (2.13 in.)
      5 - Seater - 80.3 mm (3.16 in.) 57.4 mm (2.26 in.)
      EURO 4 78.2 mm (3.08 in.) 56.9 mm (2.24 in.)
      for KDSS 82.7 mm (3.26 in.) 56.0 mm (2.20 in.)

      for KDSS

      (EURO 4)

      		 80.6 mm (3.17 in.) 55.4 mm (2.18 in.)
      N1 80.3 mm (3.16 in.) 57.4 mm (2.26 in.)
      7 - Seater - 81.3 mm (3.20 in.) 58.5 mm (2.30 in.)
      EURO 4 79.3 mm (3.12 in.) 58.0 mm (2.28 in.)
      for KDSS 83.7 mm (3.30 in.) 57.1 mm (2.25 in.)

      for KDSS

      (EURO 4)

      		 81.6 mm (3.21 in.) 56.6 mm (2.23 in.)
      VX 5 - Seater - 83.5 mm (3.29 in.) 58.9 mm (2.32 in.)
      EURO 4 81.2 mm (3.20 in.) 58.4 mm (2.30 in.)
      for Conventional Suspension 81.6 mm (3.21 in.) 56.4 mm (2.22 in.)

      for Conventional Suspension

      (EURO 4)

      		 79.2 mm (3.12 in.) 55.7 mm (2.19 in.)
      N1 83.5 mm (3.29 in.) 58.9 mm (2.32 in.)

      for Conventional Suspension

      (N1)

      		 81.6 mm (3.21 in.) 56.4 mm (2.22 in.)
      7 - Seater - 84.5 mm (3.33 in.) 59.9 mm (2.36 in.)
      EURO 4 82.2 mm (3.24 in.) 59.3 mm (2.33 in.)
      for Conventional Suspension 82.6 mm (3.25 in.) 57.4 mm (2.26 in.)

      for Conventional Suspension

      (EURO 4)

      		 80.2 mm (3.16 in.) 56.8 mm (2.24 in.)
      VXL 5 - Seater - 82.8 mm (3.26 in.) 67.2 mm (2.65 in.)
      EURO 4 80.5 mm (3.17 in.) 66.6 mm (2.62 in.)
      N1 82.8 mm (3.26 in.) 67.2 mm (2.65 in.)
      7 - Seater - 83.8 mm (3.30 in.) 67.2 mm (2.65 in.)
      EURO 4 81.5 mm (3.21 in.) 66.6 mm (2.62 in.)
      KDJ150R-GKFEYW TX 2 - Seater - 77.5 mm (3.05 in.) 52.3 mm (2.06 in.)
      5 - Seater - 78.7 mm (3.10 in.) 55.4 mm (2.18 in.)
      N1 78.7 mm (3.10 in.) 55.4 mm (2.18 in.)
      Spare Tire Less 75.0 mm (2.95 in.) 50.3 mm (1.98 in.)
      7 - Seater - 79.7 mm (3.14 in.) 56.6 mm (2.23 in.)
      TXL 2 - Seater - 78.3 mm (3.08 in.) 53.8 mm (2.12 in.)
      5 - Seater - 79.1 mm (3.11 in.) 57.1 mm (2.25 in.)
      for KDSS 81.8 mm (3.22 in.) 55.8 mm (2.20 in.)
      N1 79.1 mm (3.11 in.) 57.1 mm (2.25 in.)
      7 - Seater - 80.2 mm (3.16 in.) 58.2 mm (2.29 in.)
      for KDSS 82.5 mm (3.25 in.) 56.8 mm (2.24 in.)
      VX 5 - Seater - 82.4 mm (3.24 in.) 58.7 mm (2.31 in.)
      for Conventional Suspension 80.4 mm (3.17 in.) 56.0 mm (2.20 in.)
      N1 82.4 mm (3.24 in.) 58.7 mm (2.31 in.)

      for Conventional Suspension

      (N1)

      		 80.4 mm (3.17 in.) 56.0 mm (2.20 in.)
      7 - Seater - 83.4 mm (3.28 in.) 59.6 mm (2.35 in.)
      for Conventional Suspension 81.4 mm (3.20 in.) 57.1 mm (2.25 in.)
      GRJ150L-GKAEKW TXL 2 - Seater - 79.6 mm (3.13 in.) 52.1 mm (2.05 in.)
      5 - Seater - 79.8 mm (3.14 in.) 56.3 mm (2.22 in.)
      for KDSS 79.3 mm (3.12 in.) 54.3 mm (2.14 in.)
      N1 79.8 mm (3.14 in.) 56.3 mm (2.22 in.)
      7 - Seater - 80.9 mm (3.19 in.) 57.5 mm (2.26 in.)
      for KDSS 80.4 mm (3.17 in.) 55.4 mm (2.18 in.)
      VX 5 - Seater - 79.7 mm (3.14 in.) 57.1 mm (2.25 in.)
      for Conventional Suspension 80.5 mm (3.17 in.) 55.1 mm (2.17 in.)
      N1 79.7 mm (3.14 in.) 57.1 mm (2.25 in.)

      for Conventional Suspension

      (N1)

      		 80.5 mm (3.17 in.) 55.1 mm (2.17 in.)
      7 - Seater - 80.7 mm (3.18 in.) 58.2 mm (2.29 in.)
      for Conventional Suspension 81.6 mm (3.21 in.) 56.2 mm (2.21 in.)
      VXL 5 - Seater - 78.9 mm (3.11 in.) 65.9 mm (2.59 in.)
      N1 78.9 mm (3.11 in.) 65.9 mm (2.59 in.)
      7 - Seater - 80.0 mm (3.15 in.) 65.9 mm (2.59 in.)
      KDJ155L-GJAEYW TX 2 - Seater E5

      88.1 mm (3.47 in.) (*1)

      85.2 mm (3.35 in.) (*2)

      70.4 mm (2.77 in.) (*1)

      60.0 mm (2.36 in.) (*2)

      Spare Tire Less

      (E5)

      		 88.6 mm (3.49 in.) 67.0 mm (2.64 in.)
      5- Seater E5

      89.4 mm (3.52 in.) (*1)

      86.6 mm (3.41 in.) (*2)

      74.6 mm (2.94 in.) (*1)

      63.9 mm (2.52 in.) (*2)

      Spare Tire Less

      (E5)

      		 89.6 mm (3.53 in.) 71.1 mm (2.80 in.)
      TXL 2 - Seater E5

      88.3 mm (3.48 in.) (*1)

      85.5 mm (3.37 in.) (*2)

      71.0 mm (2.80 in.) (*1)

      60.7 mm (2.39 in.) (*2)

      Spare Tire Less

      (E5)

      		 88.8 mm (3.50 in.) 67.6 mm (2.66 in.)
      5- Seater E5

      90.0 mm (3.54 in.) (*1)

      87.1 mm (3.43 in.) (*2)

      75.3 mm (2.96 in.) (*1)

      64.6 mm (2.54 in.) (*2)

      Spare Tire Less

      (E5)

      		 90.1 mm (3.55 in.) 71.8 mm (2.83 in.)
      VX 5- Seater EG

      92.6 mm (3.65 in.) (*1)

      89.8 mm (3.54 in.) (*2)

      79.4 mm (3.13 in.) (*1)

      68.2 mm (2.69 in.) (*2)

      Spare Tire Less

      (E5)

      		 92.5 mm (3.64 in.) 75.8 mm (2.98 in.)
      KDJ155L-GJFEYW TX 2 - Seater E5

      86.9 mm (3.42 in.) (*1)

      84.0 mm (3.31 in.) (*2)

      70.1 mm (2.76 in.) (*1)

      59.7 mm (2.35 in.) (*2)

      Spare Tire Less

      (E5)

      		 87.3 mm (3.44 in.) 66.7 mm (2.63 in.)
      5- Seater E5

      88.2 mm (3.47 in.) (*1)

      85.4 mm (3.36 in.) (*2)

      74.3 mm (2.93 in.) (*1)

      63.5 mm (2.50 in.) (*2)

      Spare Tire Less

      (E5)

      		 88.4 mm (3.48 in.) 70.7 mm (2.78 in.)
      TXL 2 - Seater E5

      87.1 mm (3.43 in.) (*1)

      84.2 mm (3.31 in.) (*2)

      70.7 mm (2.78 in.) (*1)

      60.3 mm (2.37 in.) (*2)

      Spare Tire Less

      (E5)

      		 87.6 mm (3.45 in.) 67.3 mm (2.65 in.)
      5- Seater E5

      88.8 mm (3.50 in.) (*1)

      85.9 mm (3.38 in.) (*2)

      75.0 mm (2.95 in.) (*1)

      64.2 mm (2.53 in.) (*2)

      Spare Tire Less

      (E5)

      		 88.9 mm (3.50 in.) 71.5 mm (2.81 in.)
      VX 5- Seater E5

      91.4 mm (3.60 in.) (*1)

      88.6 mm (3.49 in.) (*2)

      79.1 mm (3.11 in.) (*1)

      67.8 mm (2.67 in.) (*2)

      Spare Tire Less

      (E5)

      		 91.2 mm (3.59 in.) 75.4 mm (2.97 in.)
      KDJ155R-GJAEYW TX 2 - Seater E5 87.8 mm (3.46 in.) 70.3 mm (2.77 in.)

      Spare Tire Less

      (E5)

      		 88.2 mm (3.47 in.) 66.9 mm (2.63 in.)
      5- Seater E5 89.1 mm (3.51 in.) 74.5 mm (2.93 in.)

      Spare Tire Less

      (E5)

      		 89.3 mm (3.52 in.) 70.7 mm (2.78 in.)
      TXL 2 - Seater E5 88.0 mm (3.46 in.) 71.0 mm (2.80 in.)

      Spare Tire Less

      (E5)

      		 88.5 mm (3.48 in.) 67.5 mm (2.66 in.)
      5- Seater E5 89.7 mm (3.53 in.) 75.3 mm (2.96 in.)

      Spare Tire Less

      (E5)

      		 89.8 mm (3.54 in.) 71.8 mm (2.83 in.)
      VX 5- Seater E5 92.3 mm (3.63 in.) 79.3 mm (3.12 in.)

      Spare Tire Less

      (E5)

      		 92.2 mm (3.63 in.) 75.7 mm (2.98 in.)
      KDJ155R-GJFEYW TX 2 - Seater E5 86.6 mm (3.41 in.) 70.0 mm (2.76 in.)

      Spare Tire Less

      (E5)

      		 87.0 mm (3.43 in.) 66.6 mm (2.62 in.)
      5- Seater E5 87.9 mm (3.46 in.) 74.2 mm (2.92 in.)

      Spare Tire Less

      (E5)

      		 88.1 mm (3.47 in.) 70.7 mm (2.78 in.)
      TXL 2 - Seater E5 86.8 mm (3.42 in.) 70.6 mm (2.78 in.)

      Spare Tire Less

      (E5)

      		 87.6 mm (3.45 in.) 67.3 mm (2.65 in.)
      5- Seater E5 88.5 mm (3.48 in.) 75.0 mm (2.95 in.)

      Spare Tire Less

      (E5)

      		 88.6 mm (3.49 in.) 71.4 mm (2.81 in.)
      VX 5- Seater E5 91.1 mm (3.59 in.) 79.0 mm (3.11 in.)

      Spare Tire Less

      (E5)

      		 90.9 mm (3.58 in.) 75.4 mm (2.97 in.)
      KDJ155L-GJAEYW TX 5- Seater E4

      87.3 mm (3.44 in.) (*1)

      84.5 mm (3.33 in.) (*2)

      74.0 mm (2.91 in.) (*1)

      63.3 mm (2.49 in.) (*2)

      Spare Tire Less

      (E4)

      		 87.1 mm (3.43 in.) 70.4 mm (2.77 in.)
      TXL 5- Seater E4

      87.8 mm (3.46 in.) (*1)

      85.0 mm (3.35 in.) (*2)

      74.8 mm (2.94 in.) (*1)

      64.0 mm (2.52 in.) (*2)

      Spare Tire Less

      (E4)

      		 87.7 mm (3.45 in.) 71.2 mm (2.80 in.)
      VX 5- Seater E4

      90.2 mm (3.55 in.) (*1)

      87.4 mm (3.44 in.) (*2)

      78.7 mm (3.10 in.) (*1)

      67.5 mm (2.66 in.) (*2)

      Spare Tire Less

      (E4)

      		 90.0 mm (3.54 in.) 75.1 mm (2.96 in.)
      KDJ155L-GJFEYW TX 5- Seater E4

      86.1 mm (3.39 in.) (*1)

      83.3 mm (3.28 in.) (*2)

      73.7 mm (2.90 in.) (*1)

      63.0 mm (2.48 in.) (*2)

      Spare Tire Less

      (E4)

      		 86.0 mm (3.39 in.) 69.8 mm (2.75 in.)
      TXL 5- Seater E4

      86.9 mm (3.42 in.) (*1)

      84.0 mm (3.31 in.) (*2)

      74.8 mm (2.94 in.) (*1)

      63.9 mm (2.52 in.) (*2)

      Spare Tire Less

      (E4)

      		 86.7 mm (3.41 in.) 71.2 mm (2.80 in.)
      VX 5- Seater E4

      89.1 mm (3.51 in.) (*1)

      86.3 mm (3.40 in.) (*2)

      77.5 mm (3.05 in.) (*1)

      66.4 mm (2.61 in.) (*2)

      Spare Tire Less

      (E4)

      		 88.9 mm (3.50 in.) 74.0 mm (2.91 in.)
      KDJ150R-GKAEYQ TX 5 - Seater - 76.0 mm (2.99 in.) 54.5 mm (2.15 in.)
      for Double Tank Type 75.1 mm (2.96 in.) 56.7 mm (2.23 in.)
      7 - Seater - 77.1 mm (3.04 in.) 55.7 mm (2.19 in.)
      for Double Tank Type 76.2 mm (3.00 in.) 57.7 mm (2.27 in.)
      TXL 7 - Seater - 77.6 mm (3.06 in.) 59.3 mm (2.33 in.)
      for Double Tank Type 76.7 mm (3.02 in.) 61.1 mm (2.41 in.)
      VX 7 - Seater - 80.3 mm (3.16 in.) 60.4 mm (2.38 in.)
      for Double Tank Type 79.5 mm (3.13 in.) 61.2 mm (2.41 in.)
      VXL 7 - Seater - 80.9 mm (3.19 in.) 66.3 mm (2.61 in.)
      for Double Tank Type 80.2 mm (3.16 in.) 65.8 mm (2.59 in.)
      KDJ150R-GKFEYQ TX 5 - Seater - 75.2 mm (2.96 in.) 54.3 mm (2.14 in.)
      for Double Tank Type 74.2 mm (2.92 in.) 56.5 mm (2.22 in.)
      7 - Seater - 76.5 mm (3.01 in.) 55.3 mm (2.18 in.)
      for Double Tank Type 75.6 mm (2.98 in.) 57.3 mm (2.26 in.)
      TXL 7 - Seater - 76.7 mm (3.02 in.) 58.8 mm (2.31 in.)
      for Double Tank Type 75.8 mm (2.98 in.) 60.7 mm (2.39 in.)
      GRJ150R-GKAEKQ TXL 7 - Seater - 81.0 mm (3.19 in.) 59.2 mm (2.33 in.)
      for Double Tank Type 80.1 mm (3.15 in.) 60.6 mm (2.39 in.)
      VX 7 - Seater - 77.8 mm (3.06 in.) 59.1 mm (2.33 in.)
      for Double Tank Type 77.0 mm (3.03 in.) 59.4 mm (2.34 in.)
      VXL 7 - Seater - 78.4 mm (3.09 in.) 65.5 mm (2.58 in.)
      for Double Tank Type 77.7 mm (3.06 in.) 65.1 mm (2.56 in.)
      KDJ150L-GKAEYV TX 5 - Seater - 79.9 mm (3.15 in.) 55.1 mm (2.17 in.)
      for Double Tank Type 79.0 mm (3.11 in.) 57.3 mm (2.26 in.)
      7 - Seater - 80.9 mm (3.19 in.) 56.7 mm (2.23 in.)
      for Double Tank Type 80.0 mm (3.15 in.) 58.3 mm (2.30 in.)
      9 - Seater - 79.9 mm (3.15 in.) 54.5 mm (2.15 in.)
      for Double Tank Type 79.0 mm (3.11 in.) 56.7 mm (2.23 in.)
      TXL 5 - Seater - 81.1 mm (3.19 in.) 58.0 mm (2.28 in.)
      for Double Tank Type 80.2 mm (3.16 in.) 60.1 mm (2.37 in.)
      7 - Seater - 82.2 mm (3.24 in.) 59.1 mm (2.33 in.)
      for Double Tank Type 81.3 mm (3.20 in.) 61.0 mm (2.40 in.)
      9 - Seater - 81.2 mm (3.20 in.) 56.8 mm (2.24 in.)
      for Double Tank Type 80.3 mm (3.16 in.) 58.6 mm (2.31 in.)
      VX 7 - Seater for KDSS 79.0 mm (3.11 in.) 59.2 mm (2.33 in.)
      for Conventional Suspension 81.9 mm (3.22 in.) 57.8 mm (2.28 in.)
      for Double Tank Type with KDSS 78.2 mm (3.08 in.) 60.0 mm (2.36 in.)

      for Double Tank Type

      (Conventional Suspension)

      		 81.1 mm (3.19 in.) 58.7 mm (2.31 in.)
      VXL 7 - Seater - 79.2 mm (3.12 in.) 65.9 mm (2.59 in.)
      for Double Tank Type 78.5 mm (3.09 in.) 65.5 mm (2.58 in.)
      GRJ150L-GKAEKV TXL 5 - Seater - 81.3 mm (3.20 in.) 57.3 mm (2.26 in.)
      for Double Tank Type 80.4 mm (3.17 in.) 58.9 mm (2.32 in.)
      7 - Seater - 82.4 mm (3.24 in.) 58.4 mm (2.30 in.)
      for Double Tank Type 81.5 mm (3.21 in.) 59.7 mm (2.35 in.)
      9 - Seater - 81.3 mm (3.20 in.) 56.6 mm (2.23 in.)
      for Double Tank Type 80.4 mm (3.17 in.) 58.1 mm (2.29 in.)
      VX 7 - Seater for KDSS 80.4 mm (3.17 in.) 58.5 mm (2.30 in.)
      for Conventional Suspension 82.2 mm (3.24 in.) 56.9 mm (2.24 in.)
      for Double Tank Type with KDSS 79.6 mm (3.13 in.) 58.9 mm (2.32 in.)

      for Double Tank Type

      (Conventional Suspension)

      		 81.4 mm (3.20 in.) 57.3 mm (2.26 in.)
      VXL 7 - Seater - 80.6 mm (3.17 in.) 66.0 mm (2.60 in.)
      for Double Tank Type 79.9 mm (3.15 in.) 65.6 mm (2.58 in.)
      GRJ150L-GKFEKV TXL 5 - Seater - 80.1 mm (3.15 in.) 56.7 mm (2.23 in.)
      for Double Tank Type 79.1 mm (3.11 in.) 58.2 mm (2.29 in.)
      7 - Seater - 81.2 mm (3.20 in.) 57.8 mm (2.28 in.)
      for Double Tank Type 80.3 mm (3.16 in.) 59.3 mm (2.33 in.)
      9 - Seater - 80.1 mm (3.15 in.) 55.6 mm (2.19 in.)
      for Double Tank Type 79.2 mm (3.12 in.) 57.1 mm (2.25 in.)
      TRJ150L-GKPEKV TX 5 - Seater - 81.9 mm (3.22 in.) 55.3 mm (2.18 in.)
      7 - Seater - 83.1 mm (3.27 in.) 56.5 mm (2.22 in.)
      9 - Seater - 81.9 mm (3.22 in.) 54.8 mm (2.16 in.)
      TXL 5 - Seater - 82.5 mm (3.25 in.) 56.5 mm (2.22 in.)
      for China 84.0 mm (3.31 in.) 58.4 mm (2.30 in.)
      7 - Seater - 83.6 mm (3.29 in.) 57.7 mm (2.27 in.)
      for China 84.8 mm (3.34 in.) 59.4 mm (2.34 in.)
      9 - Seater - 82.5 mm (3.25 in.) 55.9 mm (2.20 in.)
      VX 7 - Seater for Conventional Suspension 84.6 mm (3.33 in.) 54.6 mm (2.15 in.)
      TRJ150L-GKMEKV TX 5 - Seater - 80.6 mm (3.17 in.) 54.7 mm (2.15 in.)
      7 - Seater - 81.8 mm (3.22 in.) 55.9 mm (2.20 in.)
      9 - Seater - 80.6 mm (3.17 in.) 54.2 mm (2.13 in.)
      TXL 5 - Seater - 81.2 mm (3.20 in.) 56.0 mm (2.20 in.)
      for China 82.7 mm (3.26 in.) 57.9 mm (2.28 in.)
      7 - Seater - 82.3 mm (3.24 in.) 57.1 mm (2.25 in.)
      9 - Seater - 81.1 mm (3.19 in.) 55.3 mm (2.18 in.)
      VX 7 - Seater for Conventional Suspension 83.3 mm (3.28 in.) 54.0 mm (2.13 in.)
      TRJ155L-GJPEKV TX 5 - Seater - 82.6 mm (3.25 in.) 61.7 mm (2.43 in.)
      TXL 5 - Seater - 82.9 mm (3.26 in.) 61.8 mm (2.43 in.)

      • (*1) Light duty

      • (*2) Heavy duty

      Measuring points
      A
      Ground clearance of the center of the front wheel
      B
      Ground clearance of the center of the front adjusting cam bolt
      C
      Ground clearance of the center of the rear wheel
      D
      Ground clearance of the center of the rear lower control arm front side

      If the vehicle height is not as specified, adjust the height by pressing down on the vehicle several times to stabilize the suspension.

      Note

      The standard value shown here is a value that is used for adjusting the wheel alignment and does not indicate the height of an actual vehicle.

  4. INSPECT VEHICLE HEIGHT SELECTION

    Tech Tips

    Perform this inspection with the vehicle unloaded.


    1. Start the engine.

    2. Using the height control switch, check the vehicle height adjustment amount and vehicle height adjustment time for each vehicle height mode.

      Tech Tips

      The select mode light of the height control indicator blinks during vehicle height adjustment and remains on after the vehicle height adjustment is completed.

      Standard
      Mode Transition Operation Details Vehicle Height Adjustment Time
      N mode to HI mode From when "up" on height control switch pressed and control begins to when vehicle height is adjusted to HI mode Approximately 20 seconds
      HI mode to N mode From when "down" on height control switch pressed and control begins to when vehicle height is adjusted to N mode Approximately 20 seconds
      N mode to LO mode From when "down" on height control switch pressed and control begins to when vehicle height is adjusted to LO mode Approximately 20 seconds
      LO mode to N mode From when "up" on height control switch pressed and control begins to when vehicle height is adjusted to N mode Approximately 20 seconds

  5. ADJUST VEHICLE HEIGHT

    Note


    • While adjusting vehicle height, do not put anyone or anything on or in the vehicle because doing so will affect vehicle height.

    • Height control sensors are installed on both the left and right sides. However, each side cannot be adjusted individually, as the left and right sides are not controlled independently.

    • Even if the height control sensor of only one side is adjusted, the vehicle height of both the left and right sides will change.


    1. Suspend vehicle height control by pressing the height control switch.

    2. Put the vehicle on a level surface.

    3. A01DRB6E01

      Measure the vehicle height (C - D measurement) on the right side and left side.

      Standard vehicle height
      (See page Click here)
      Difference between right and left side
      10 mm (0.394 in.) or less

    4. If the actual vehicle height differs from the vehicle height (C - D measurement), adjust it by jacking up the frame, etc. (Procedure "A").

    5. A01DM49

      If the procedure "A" differs from the vehicle height (C - D measurement), adjust it by following the procedures below.


      1. Loosen the nut.

      2. Move the height control sensor link up and down along the slotted hole of the bracket.

      3. Adjust the vehicle height to the vehicle height (C - D measurement) while checking the value on the intelligent tester or voltmeter.

        Standard voltage
        2.5 V

      4. Tighten the nut.

        Torque:
        5.6 N*m  { 57 kgf*cm, 50 in.*lbf }

    6. If the vehicle height cannot be adjusted by performing procedure "A", adjust it again by following the procedures below.


      1. A01DQ63E01
        Text in Illustration
        *1 Lock Nut

        Loosen the 2 lock nuts of the height control sensor link.

      2. Adjust the vehicle height to the vehicle height (C - D measurement) by turning the link while checking the value on the intelligent tester or the voltmeter.

        Standard voltage
        2.5 V

        Tech Tips

        The vehicle height will be changed by approximately 3.0 mm (0.118 in.) when changing the link by approximately 2 mm (0.0787 in.).

      3. Tighten the 2 lock nuts.

        Torque:
        5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    7. Check that the lengths of the screw parts, labeled "A" in the illustration, are within the standard values.

      Standard Length
      Item Specified Condition
      LH 6.0 to 12.5 mm (0.24 to 0.49 in.)
      RH 6.5 to 15.0 mm (0.26 to 0.59 in.)

    8. Change the vehicle height (from the normal position to the high position, and from the high position to the normal position).

    9. Measure the vehicle height (C - D measurement) on the right and left side (Procedure "D").

    10. Check if the vehicle height (C - D measurement) is within the specified range.

      Tech Tips

      If the values are outside the standard range, perform the procedures from procedure "A" to procedure "D" again.