DESCRIPTION
The stabilizer control ECU receives the speed signal from the skid control ECU via CAN communication.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1883/83 | The stabilizer control ECU continuously receives a speed sensor malfunction signal from the skid control ECU for 1 second. |
|
INSPECTION PROCEDURE
Tech Tips
If DTC U0122/71 and C1883/83 are output at the same time, perform the inspection necessary for the CAN communication system first Click here.
PROCEDURE
CHECK DTC (VEHICLE STABILITY CONTROL SYSTEM)
Check for speed sensor malfunction DTCs Click here.
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output | B |
| B |
|
GO TO VEHICLE STABILITY CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART) Click here |
| A |
|
RECONFIRM DTC
Clear the DTCs Click here.
Perform a road test.
Check for DTCs Click here.
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output | B |
| B |
|
REPLACE STABILIZER CONTROL ECU Click here |
| A |
|
USE SIMULATION METHOD TO CHECK Click here