REAR DIFFERENTIAL LOCK POSITION SWITCH INSPECTION


  1. INSPECT REAR DIFFERENTIAL LOCK POSITION SWITCH


    1. A01DTIHE06
      Text in Illustration
      *a

      Component without harness connected

      (Rear Differential Lock Position Switch)
      *b Pushed
      *c Released

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 (GND) - 2 (+B) Pushed Below 1 Ω
      Released 100 kΩ or higher

      • If the result is not as specified, replace the rear differential lock position switch.