REAR AXLE HUB BOLT REPLACEMENT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE REAR WHEEL

  2. REMOVE PARKING BRAKE ASSEMBLY


    1. Remove the parking brake assembly Click here.

  3. REMOVE REAR AXLE HUB BOLT LH


    1. A01DM0LE02
      Text in Illustration
      *1 Nut
      *a Turn
      *b Hold

      Using SST and a screwdriver or equivalent to hold the axle hub, remove the hub bolt.

      SST
      09650-17011

      Note


      • Do not deform the oil deflector.

      • Make sure to align the notch of SST with the flange of the oil deflector.

  4. INSTALL REAR AXLE HUB BOLT LH

    A01DRAUE01
    Text in Illustration
    *1 Washer
    *2 Nut
    *a Turn
    *b Hold

    1. Insert a new hub bolt.

    2. Temporarily install a washer and hub nut to the hub bolt as shown in the illustration.

      Note

      Install a hub nut to prevent damage to the hub bolt.

    3. Using a screwdriver or equivalent to hold the hub, turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.

    4. Remove the hub nut and washer.

      Note

      Do not damage the threads of the hub bolt.

  5. INSTALL PARKING BRAKE ASSEMBLY


    1. Install the parking brake assembly Click here.

  6. INSTALL REAR WHEEL

    Torque:
    112 N*m  { 1142 kgf*cm, 83 ft.*lbf }