CENTER DIFFERENTIAL LOCK SWITCH (w/ Combination Switch) INSPECTION


  1. INSPECT CENTER CLUSTER MODULE SWITCH (CENTER DIFFERENTIAL LOCK SWITCH)


    1. A01DOVRE04
      Text in Illustration
      *a

      Component without harness connected

      (Center Cluster Module Switch (Center Differential Lock Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      3 (CPU) - 24 (E) ON Below 1 Ω
      OFF 10 kΩ or higher

      If the result is not as specified, replace the center cluster module switch (center differential lock switch).

    2. A01DUGZE01
      Text in Illustration
      *a

      Component without harness connected

      (Center Cluster Module Switch (Center Differential Lock Switch))
      *b Center Cluster Module Switch (Center Differential Lock Switch) Illumination

      Apply battery voltage between the terminals of the switch, and check the illumination condition of the center cluster module switch (center differential lock switch).

      Standard
      Measurement Condition Specified Condition

      Battery positive (+) → 13 (ILL+)

      Battery negative (-) → 12 (ILL-)

      		 Illuminates

      If the result is not as specified, replace the center cluster module switch (center differential lock switch).