Click here

TRANSFER ASSEMBLY INSTALLATION

Click here
Click here
  1. Click here

    INSTALL TRANSFER ASSEMBLY


    1. for 1KD-FTV:

      Install the transfer assembly with the 8 bolts and 2 brackets.

      24 N*m 245 kgf*cm 18 ft.*lbf
      Note:

      Take care not to damage the adaptor rear oil seal with the transfer input gear spline.

    2. except 1KD-FTV:

      Install the transfer assembly with the 8 bolts and bracket.

      24 N*m 245 kgf*cm 18 ft.*lbf
      Note:

      Take care not to damage the adaptor rear oil seal with the transfer input gear spline.

  2. Click here

    INSTALL AUTOMATIC TRANSMISSION WITH TRANSFER


    1. for A343F:


      1. Install the automatic transmission with transfer (Click here).

    2. for 1GR-FE, A750F:


      1. Install the automatic transmission with transfer (Click here).

    3. for 1KD-FTV, A750F:


      1. Install the automatic transmission with transfer (Click here).

  3. Click here

    INSTALL MANUAL TRANSMISSION WITH TRANSFER


    1. for G52F:


      1. Install the manual transmission with transfer (Click here).

    2. for R150F:


      1. Install the manual transmission with transfer (Click here).

    3. for 1GR-FE, RA61F:


      1. Install the manual transmission with transfer (Click here).

    4. for 1KD-FTV, RA61F:


      1. Install the manual transmission with transfer (Click here).

  4. Click here

    ADD TRANSFER OIL


    1. Remove the filler plug and gasket.

    2. Add oil so that the oil level is between 0 to 5.0 mm (0 to 0.196 in.) from the bottom lip of the filler plug hole.

      Note:

      • Add oil slowly.

      • Add oil a little at a time, waiting several minutes between each addition of oil.

    3. Wait approximately 5 minutes and check that the oil level has not changed.

    4. Install a new gasket to the filler plug and then tighten the plug.

      37 N*m 377 kgf*cm 27 ft.*lbf
  5. Click here

    CHECK FOR TRANSFER OIL LEAK