CLUTCH PEDAL (for RHD) REMOVAL


  1. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY


    1. Remove the lower No. 1 instrument panel airbag Click here.

  2. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY


    1. Remove the clutch master cylinder Click here.

  3. REMOVE CLUTCH PEDAL ASSEMBLY

    A01DSJG

    1. Remove the bolt and clutch pedal.

  4. REMOVE CLUTCH START SWITCH ASSEMBLY


    1. A01DP75

      for LHD:


      1. Disconnect the clutch start switch connector.

      2. Remove the nut and clutch start switch.

    2. A01DM7A

      for RHD:


      1. Disconnect the clutch start switch connector and detach the clamp.

      2. Remove the nut and clutch start switch.

  5. REMOVE TURN OVER SPRING SEAT COMPRESSION SPRING

    A01DOF6

    1. Remove the compression spring.

  6. REMOVE CLUTCH PEDAL SUB-ASSEMBLY

    A01DTMR

    1. Remove the nut, washer and bolt.

    2. Remove the clutch pedal from the clutch pedal support.

  7. REMOVE CLUTCH PEDAL SPRING HOLDER

    A01DMKI

    1. Remove the spring holder from the clutch pedal support.

  8. REMOVE CLUTCH SWITCH ASSEMBLY (w/ Cruise Control System)

    A01DTEM

    1. Loosen the lock nut and remove the clutch switch.

  9. REMOVE CLUTCH PEDAL STOPPER BOLT (w/o Cruise Control System)

    A01DQ57

    1. Loosen the lock nut and remove the stopper bolt.

  10. REMOVE CLUTCH PEDAL PAD

  11. REMOVE CLUTCH PEDAL BUSH

    A01DMQ5

    1. Remove the 2 bushes from the clutch pedal.

  12. REMOVE CLUTCH PEDAL SHAFT COLLAR

    A01DUAV

    1. Remove the shaft collar.

  13. REMOVE NO. 1 CLUTCH PEDAL CUSHION

    A01DOAB

    1. Using needle-nose pliers, remove the 3 cushions from the clutch pedal.

  14. REMOVE CLUTCH PEDAL TURNOVER BUSH

    A01DO6B

    1. Remove the turnover bush from the clutch pedal.

  15. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH

    A01DN80

    1. Using an 8 mm hexagon wrench and hammer, remove the clevis bush.