CLUTCH MASTER CYLINDER (for LHD) REMOVAL


  1. DRAIN BRAKE FLUID FROM CLUTCH LINE

  2. DISCONNECT CLUTCH RESERVOIR TUBE

    A01DR63

    1. Disconnect the clutch reservoir tube.

      Tech Tips

      Use a container to collect the fluid.

  3. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE

    A01DN6U

    1. Using a union nut wrench, disconnect the flexible hose tube.

      Tech Tips

      Use a container to collect the fluid.

  4. REMOVE DRIVER SIDE JUNCTION BLOCK ASSEMBLY


    1. Remove the driver side junction block Click here.

  5. REMOVE CLUTCH PEDAL WITH CLUTCH MASTER CYLINDER


    1. Disconnect the clutch start switch connector.

    2. w/ Cruise Control:

      Disconnect the clutch switch connector.

    3. A01DTPQ

      Remove the 2 nuts, bolt and clutch pedal with clutch master cylinder.

  6. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY


    1. A01DOE1

      Disconnect the clutch reservoir hose.

    2. A01DSPK

      Using a union nut wrench, disconnect the flexible tube.

    3. A01DRWU

      Remove the nut and clutch start switch from the clutch pedal support.

    4. A01DUTF

      Remove the clip and pin, and separate the push rod clevis from the clutch pedal.

    5. A01DNR4

      Remove the 2 bolts and clutch master cylinder.