OIL PUMP REASSEMBLY


  1. INSTALL FRONT OIL PUMP OIL SEAL

    A01DQ20E01

    1. Using SST and a hammer, tap in a new oil seal.

      SST
      09350-30020   ( 09351-32140 )

      Tech Tips

      Make sure the oil seal end is flush with the outer edge of the pump body.

    2. Coat the lip of the oil seal with MP grease.

  2. FIX FRONT OIL PUMP BODY


    1. Place the oil pump body on the torque converter clutch.

  3. INSTALL FRONT OIL PUMP DRIVEN GEAR

    A01DNYKE01

    1. Coat the driven gear with ATF.

    2. Install the driven gear to the oil pump body.

  4. INSTALL FRONT OIL PUMP DRIVE GEAR

    A01DTAOE01

    1. Coat the drive gear with ATF.

    2. Install the drive gear to the oil pump body.

  5. INSTALL STATOR SHAFT ASSEMBLY

    A01DOZ7E02

    1. Align the bolt holes of the stator shaft with the bolt holes of the oil pump body and install the stator shaft to the oil pump body.

    2. Install the 13 bolts.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

  6. INSTALL CLUTCH DRUM OIL SEAL RING

    A01DNH2E01

    1. Coat 2 new oil seal rings with ATF.

    2. Squeeze the ends of the 2 oil seal rings together with the overlap distance 8.0 mm (0.314 in.) or less, and then install them to the stator shaft groove.

      Tech Tips

      After installing the oil seal rings, check that they rotate smoothly.

  7. INSPECT OIL PUMP DRIVE GEAR ROTATION

    A01DU9GE01

    1. Check that the drive gear rotates smoothly.

    2. Remove the oil pump from the torque converter.

  8. INSTALL FRONT OIL PUMP BODY O-RING

    A01DNJ3E01

    1. Install a new O-ring to the oil pump.