OIL COOLER REMOVAL


  1. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    1. A01DQWQ

      Remove the 4 bolts.

    2. Unhook the engine under cover from the vehicle body as shown in the illustration.

  2. REMOVE REAR ENGINE UNDER COVER ASSEMBLY


    1. Remove the 4 bolts and rear engine under cover.

  3. REMOVE FRONT FENDER APRON SEAL RH


    1. A01DRNE

      Remove the 5 clips and front fender apron seal RH.

  4. REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL RH


    1. A01DRRG

      Remove the 5 clips and front No. 1 fender apron to frame seal.

  5. REMOVE NO. 1 OIL COOLER INLET HOSE AND NO. 1 OIL COOLER OUTLET HOSE

    A01DSTPE01

    1. Disconnect the No. 1 oil cooler inlet hose and No. 1 oil cooler outlet hose from the No. 2 oil cooler tube.

    2. Disconnect the 2 hoses from the oil cooler inlet tube and No. 1 oil cooler outlet tube and remove them.

      Note

      When disconnecting the hoses from the tube, support the tube by hand and be careful to prevent the tube from being deformed.

  6. REMOVE NO. 1 OIL COOLER INLET TUBE AND NO. 1 OIL COOLER OUTLET TUBE

    A01DSPN

    1. Using a union nut wrench, disconnect the No. 1 oil cooler inlet tube and No. 1 oil cooler outlet tube from each oil cooler tube union.

    2. Remove the 3 bolts to open the 3 No. 2 flexible hose clamps and remove 2 oil cooler tubes.

  7. REMOVE NO. 2 OIL COOLER INLET HOSE AND NO. 2 OIL COOLER OUTLET HOSE

    A01DNZOE01

    1. Detach the claw to open the No. 1 flexible hose clamp.

    2. Disconnect the No. 2 oil cooler inlet hose and No. 2 oil cooler outlet hose from the radiator.

    3. Disconnect the 2 hoses from the No. 2 oil cooler tube and remove them.

      Note

      When disconnecting the hoses from the tube, support the tube by hand and be careful to prevent the tube from being deformed.

  8. REMOVE NO. 2 OIL COOLER TUBE SUB-ASSEMBLY

    A01DSEG

    1. Remove the 2 bolts and No. 2 oil cooler tube.