PARK / NEUTRAL POSITION SWITCH INSPECTION


  1. INSPECT PARK/NEUTRAL POSITION SWITCH

    A01DTXNE11
    Text in Illustration
    *a

    Component without harness connected

    (Park/Neutral Position Switch)

    1. Measure the resistance of the park/neutral switch when the shift lever is moved to each position.

      Standard Resistance
      Tester Connection Condition Specified Condition

      • 2 (RB) - 6 (PL)

      • 4 (B) - 5 (L)

      		 Shift lever in P Below 1 Ω
      2 (RB) - 1 (RL) Shift lever in R Below 1 Ω

      • 2 (RB) - 9 (NL)

      • 4 (B) - 5 (L)

      		 Shift lever in N Below 1 Ω
      2 (RB) - 7 (DL) Shift lever in D or 3 Below 1 Ω
      2 (RB) - 3 (2L) Shift lever in 2 Below 1 Ω
      2 (RB) - 8 (LL) Shift lever in L Below 1 Ω

      • 2 (RB) - 6 (PL)

      • 4 (B) - 5 (L)

      		 Shift lever not in P 10 kΩ or higher
      2 (RB) - 1 (RL) Shift lever not in R 10 kΩ or higher

      • 2 (RB) - 9 (NL)

      • 4 (B) - 5 (L)

      		 Shift lever not in N 10 kΩ or higher
      2 (RB) - 7 (DL) Shift lever not in D or 3 10 kΩ or higher
      2 (RB) - 3 (2L) Shift lever not in 2 10 kΩ or higher
      2 (RB) - 8 (LL) Shift lever not in L 10 kΩ or higher

      If the result is not as specified, replace the switch assembly.