Click here

DYNAMIC RADAR CRUISE CONTROL SYSTEM, Diagnostic DTC:P0575

Click here
Click here Click here
DTC Code DTC Name
P0575 Cruise Control Input Circuit
Click here

DESCRIPTION

This DTC indicates the presence of internal abnormalities in the ECM.

DTC Code DTC Detection Condition Trouble Area
P0575

Either condition is met:


  • The cruise control input signal is abnormal.

  • The stop light switch input signal is abnormal.

 ECM
Click here

INSPECTION PROCEDURE

Note:

When the ECM is replaced with a new one, initialization must be performed (Click here).

Tip:

The ECM receives signals from each sensor to control all functions of the dynamic radar cruise control system. When a trouble code is stored, the fail-safe function remains on until the ignition switch is turned off.

Click here

PROCEDURE


  1. Click here

    CHECK FOR DTC


    1. Clear the DTCs (Click here).

    2. Check for DTCs (Click here).

      OK
      DTC P0575 is not output.
      Table 1. Result
      Result Proceed to
      OK A
      NG (for 1GR-FE) B
      NG (for 1KD-FTV) C

  2. Click here

    USE SIMULATION METHOD TO CHECKClick here

  3. Click here

    REPLACE ECMClick here

  4. Click here

    REPLACE ECMClick here