ENGINE SWITCH REMOVAL

REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

1. Detach the 5 clips and remove the No. 2 instrument panel finish panel cushion.

REMOVE INSTRUMENT PANEL FINISH PANEL END LH

1. Detach the 4 clips and remove the instrument panel finish panel end LH.

REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION

REMOVE INSTRUMENT PANEL FINISH PANEL END RH

1. Detach the 4 clips and remove the instrument panel finish panel end RH.

REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY

REMOVE FRONT CONSOLE UPPER PANEL GARNISH

1. w/o Seat Heater System:

   
   
   1. 

      Text in Illustration

      *1	Protective Tape

      Put protective tape around the front console upper panel garnish.

   2. Detach the 5 clips and remove the front console upper panel garnish.

   3. Disconnect the connector.

2. w/o CRAWL:

   
   
   1. 

      Text in Illustration

      *1	Protective Tape

      Put protective tape around the front console upper panel garnish.

   2. Detach the 5 clips and remove the front console upper panel garnish.

   3. Disconnect each connector.

3. w/ CRAWL:

   
   
   1. 

      Text in Illustration

      *1	Protective Tape

      Put protective tape around the front console upper panel garnish.

   2. Detach the 5 clips and remove the front console upper panel garnish.

REMOVE COMBINATION SWITCH (w/ CRAWL)

Click here

REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o CRAWL)

1. Remove the 2 bolts <E>.

2. Detach the 3 clips and guide and remove the lower center instrument cluster finish panel.