STARTER REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR ENGINE UNDER COVER ASSEMBLY


    1. Remove the 4 bolts and rear engine under cover.

  3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY


    1. A01DUMR

      Remove the 2 bolts and disconnect the release cylinder.

  4. DISCONNECT CLUTCH FLEXIBLE HOSE BRACKET


    1. A01DT7N

      Remove the bolt and disconnect the clutch flexible hose bracket.

  5. REMOVE STARTER ASSEMBLY


    1. A01DPXX

      Disconnect the starter connector.

    2. Remove the terminal cap.

    3. Remove the nut and disconnect the starter wire.

    4. A01DSW2

      Remove the nut, 2 bolts and starter assembly.