STARTER (for 2.2 kW Type) DISASSEMBLY


  1. REMOVE STARTER YOKE ASSEMBLY


    1. A01DQN1E01

      Remove the nut and disconnect the lead wire from terminal C.

    2. A01DMI2E01

      Remove the 2 bolts and 2 O-rings.

    3. Pull out the starter yoke together with the starter armature.

    4. Remove the O-ring from the starter yoke.

  2. REMOVE MAGNET STARTER SWITCH ASSEMBLY


    1. A01DOY0

      Remove the 2 bolts and magnet starter switch.

    2. A01DS7KE01
      Text in Illustration
      *1 Return Spring
      *2 Pinion Gear
      *3 Idler Gear
      *4 Clutch Roller
      *5 Retainer
      *6 Starter Clutch
      *7 Starter Housing

      Remove the return spring, pinion gear, idler gear, clutch roller, retainer and starter clutch from the starter housing.

    3. A01DOTCE04
      Text in Illustration
      *1 Magnet Hand

      Using a magnet hand, remove the steel ball from the starter clutch hole.

  3. REMOVE STARTER BRUSH HOLDER ASSEMBLY

    A01DO08E03

    1. Disconnect the 4 starter yoke brushes from the starter brush holder.


      1. Using a screwdriver, pull back the spring.

      2. Disconnect the brush from the starter brush holder.

    2. Remove the starter brush holder from the starter yoke.

  4. REMOVE STARTER ARMATURE ASSEMBLY


    1. A01DNXQ

      Using a plastic-faced hammer, tap the starter yoke to remove the starter armature from the starter yoke.