OIL PRESSURE SWITCH REMOVAL


  1. REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY


    1. A01DTKZ

      Disconnect the sensor connector.

    2. Detach the wire harness clamp.

    3. Loosen the hose clamp and remove the resonator with air cleaner cap.

    4. A01DNS4

      Detach the 4 hook clamps, and then remove the air cleaner cap and resonator with air cleaner cap.

  2. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    1. Remove the dipstick.

    2. A01DTQX

      Remove the 2 bolts and dipstick guide.

    3. Remove the O-ring from the dipstick guide.

  3. REMOVE VACUUM PUMP OIL INLET HOSE


    1. A01DSJ0

      Remove the union bolt and gasket, and then disconnect the vacuum pump oil inlet hose from the cylinder block.

  4. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. A01DO2M

      Using a 24 mm deep socket wrench, remove the oil pressure switch.