Click here

OIL LEVEL SENSOR REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE REAR ENGINE UNDER COVER ASSEMBLY


    1. Remove the 4 bolts and rear engine under cover.

  2. Click here

    DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the oil pan drain plug and gasket, and then drain the engine oil into a container.

    3. Wipe the oil pan and drain plug.

    4. Install a new gasket and the oil pan drain plug.

      34 N*m 347 kgf*cm 25 ft.*lbf
  3. Click here

    REMOVE ENGINE OIL LEVEL SENSOR


    1. A01DS73

      Disconnect the engine oil level sensor connector.

    2. Remove the 4 bolts, engine oil level sensor.

    3. Cut away part of the gasket and remove the gasket from the engine oil level sensor.

      Tip:

      Remove only the outer part of the gasket.