OIL PRESSURE SWITCHING VALVE REMOVAL

REMOVE FRONT BUMPER LOWER COVER

1. Remove the clip, 5 bolts and front bumper lower cover.

REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

1. Remove the 4 bolts and No. 1 engine under cover.

DRAIN ENGINE OIL

1. Remove the oil filler cap.

2. Remove the oil pan drain plug and gasket, and then drain the engine oil into a container.

3. Wipe the oil pan and drain plug.

4. Install a new gasket and the oil pan drain plug.

   Torque:

   34 N*m  { 347 kgf*cm, 25 ft.*lbf }