Click here

OIL PRESSURE SWITCH INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. Apply adhesive to 2 or 3 threads of the oil pressure switch.

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
      Note:

      Do not apply adhesive to the oil inlet port of the oil pressure switch.

    2. Using a 24 mm deep socket wrench, install the oil pressure switch.

      15 N*m 153 kgf*cm 11 ft.*lbf
      Note:

      Do not start the engine within 1 hour of installation.

    3. Connect the oil pressure switch connector.

  2. Click here

    INSPECT FOR ENGINE OIL LEAK


    1. Start the engine. Make sure that there are no oil leaks from the area that was worked on.

  3. Click here

    INSTALL FRONT FENDER APRON SEAL RH


    1. Install the apron seal with the 5 clips.