EXHAUST MANIFOLD REMOVAL


  1. REMOVE FRONT FENDER APRON SEAL RH


    1. A01DTAM

      Remove the 4 clips and fender apron seal.

  2. REMOVE FRONT NO. 1 FENDER APRON TO FRAME SEAL RH


    1. A01DU3U

      Remove the 5 clips and fender apron seal.

  3. REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY


    1. A01DTKZ

      Disconnect the sensor connector.

    2. Detach the wire harness clamp.

    3. Loosen the hose clamp and remove the resonator with air cleaner cap.

    4. A01DNS4

      Detach the 4 hook clamps, and then remove the air cleaner cap and resonator with air cleaner cap.

  4. REMOVE INTAKE PIPE


    1. A01DQT4E01

      Loosen the hose clamp and remove the 2 bolts and intake pipe.

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. Remove the bolt from the clamp.

    2. A01DQRD

      Remove the 2 bolts and No. 1 exhaust pipe support bracket.

    3. A01DNIM

      Remove the 3 nuts and front exhaust pipe.

    4. Remove the gasket.

  6. REMOVE ENGINE OIL LEVEL DIPSTICK


    1. Remove the oil level dipstick.

  7. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    1. Remove the 2 bolts, guide and O-ring.

  8. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01DT3X

      Remove the 3 bolts and insulator.

  9. REMOVE EXHAUST MANIFOLD


    1. A01DRQ6

      Remove the 2 nuts, 6 bolts and manifold.

    2. Remove the gasket.