RADIATOR REMOVAL


  1. REMOVE UPPER RADIATOR SUPPORT SEAL


    1. Remove the 13 clips and upper radiator support seal.

  2. REMOVE FRONT BUMPER COVER LOWER


    1. Remove the clip, 5 bolts and front bumper cover lower.

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    1. Remove the 4 bolts.

    2. A01DQWQ

      Unhook the engine under cover from the vehicle body as shown in the illustration.

  4. DRAIN ENGINE COOLANT

    CAUTION:

    Do not remove the radiator cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

    A01DOIBE01
    Text in Illustration
    *1 Reservoir Cap *2 Radiator Cap
    *3 Radiator Drain Cock Plug *4 Cylinder Block Drain Cock Plug

    1. Loosen the radiator drain cock plug.

    2. Remove the radiator cap and drain the coolant.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

    3. Loosen the cylinder block drain cock plug and drain the coolant from the engine.

  5. REMOVE V-BANK COVER


    1. A01DQBNE01
      Text in Illustration
      *1 Pin
      *2 Hook

      Raise the front of the V-bank cover to detach the 2 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

  6. REMOVE FRONT BUMPER COVER


    1. Remove the front bumper cover Click here.

  7. REMOVE UPPER FRONT BUMPER RETAINER


    1. A01DNEF

      Remove the 3 bolts and retainer.

  8. REMOVE RADIATOR SIDE DEFLECTOR RH


    1. A01DSMF

      Using a clip remover, detach the 3 claws and remove the clip. Then move the side deflector so that the radiator can be removed in the step below.

  9. REMOVE RADIATOR SIDE DEFLECTOR LH


    1. A01DN1F

      Using a clip remover, detach the 3 claws and remove the clip. Then move the side deflector so that the radiator can be removed in the step below.

  10. REMOVE NO. 1 RADIATOR HOSE

    A01DPRH

  11. REMOVE NO. 2 RADIATOR HOSE


    1. A01DRKD

      Disconnect the radiator hose from the water inlet.

    2. A01DU7F

      Detach the clamp and remove the radiator hose.

  12. REMOVE RADIATOR RESERVOIR


    1. A01DUD0

      Disconnect the reservoir hose from the upper side of the radiator tank.

    2. Remove the 3 bolts and radiator reservoir.

  13. DISCONNECT OIL COOLER TUBE (w/ Warmer)


    1. A01DQ2S

      Detach the claw to open the flexible hose clamp, and then remove the 2 bolts to disconnect the oil cooler tube from the fan shroud.

  14. DISCONNECT OIL COOLER TUBE (w/ Air Cooled Transmission Oil Cooler)


    1. A01DN1S

      Detach the claw to open the flexible hose clamp, and then remove the 2 bolts to disconnect the oil cooler tube from the fan shroud.

  15. REMOVE FAN SHROUD


    1. A01DS77

      Loosen the 4 nuts holding the fluid coupling fan.

    2. Remove the fan and generator V-belt Click here.

    3. A01DLXP

      Remove the 2 bolts holding the fan shroud.

    4. Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.

      Note

      Be careful not to damage the radiator core.

    5. Remove the fan pulley from the water pump.

  16. REMOVE RADIATOR ASSEMBLY


    1. A01DQ4JE01
      Text in Illustration
      *A w/ Warmer
      *B w/ Air Cooled Transmission Oil Cooler

      for Automatic Transmission:

      Disconnect the 2 oil cooler hoses.

    2. A01DR4K

      Remove the 4 bolts and radiator.

  17. REMOVE NO. 1 RADIATOR TO SUPPORT SEAL


    1. Remove the seal from the radiator assembly.

  18. REMOVE NO. 2 RADIATOR TO SUPPORT SEAL


    1. Remove the seal from the radiator assembly.