FUEL SENDER GAUGE ASSEMBLY (for Double Tank Type) INSTALLATION


  1. INSTALL FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank)


    1. A01DSQAE01
      Text in Illustration
      *1 Fuel Sub-tank
      A01DQPB Slide

      Set the fuel sender gauge on the fuel sub-tank. Then slide the fuel sender gauge downward to install it.

    2. Connect the fuel sender gauge connector.

  2. INSTALL FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)


    1. A01DMI1E01
      Text in Illustration
      *1 Fuel Gauge Support
      A01DQPB Slide

      Set the sender gauge on the fuel gauge support. Then slide the sender gauge upward to install it.

      Note

      Make sure the part labeled A in the illustration is securely inserted into the hole of the fuel gauge support before sliding the fuel sender gauge upward.

    2. A01DPSZE01
      Text in Illustration
      *1 Lead Wire (Black)
      *2 Lead Wire (Red)

      Install the 2 lead wires with the 2 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

      Note

      Be sure to install the lead wires in the correct locations according to their color as shown in the illustration.

  3. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (for Fuel Main Tank)


    1. Install the fuel suction with pump and gauge tube assembly Click here.

  4. INSTALL FUEL TANK VENT TUBE ASSEMBLY (for Fuel Sub Tank)


    1. Install the fuel tank vent tube assembly Click here.