Click here

FUEL SENDER GAUGE ASSEMBLY (for Single Tank Type) INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL FUEL SENDER GAUGE ASSEMBLY (for 5 Door)


    1. A01DOE3E01

      Set the fuel sender gauge on the fuel sub-tank. Then slide the fuel sender gauge downward to install it.

      Table 1. Text in Illustration
      *1 Fuel Sub-Tank
      A01DQPB Slide

    2. Connect the fuel sender gauge connector.

  2. Click here

    INSTALL FUEL SENDER GAUGE ASSEMBLY (for 3 Door)


    1. Install a new gasket and fuel sender gauge with the 5 screws.

      1.5 N*m 15 kgf*cm 13 in.*lbf

    2. Connect the fuel sender gauge connector and fuel pump connector.

  3. Click here

    INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (for 5 Door)


    1. Install the fuel suction with pump and gauge tube assembly (Click here).

  4. Click here

    INSTALL REAR FLOOR SERVICE HOLE COVER (for 3 Door)


    1. Install the rear floor service hole cover with the 3 screws.

  5. Click here

    INSTALL REAR FLOOR MAT SUPPORT PLATE (for 3 Door)


    1. Attach the 6 claws to install the rear floor mat rear support plate.

    2. Install the 5 screws.