Click here

FUEL SENDER GAUGE ASSEMBLY (for Single Tank Type) REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (for 5 Door)


    1. Remove the fuel suction with pump and gauge tube assembly (Click here).

  2. Click here

    REMOVE REAR FLOOR MAT SUPPORT PLATE (for 3 Door)


    1. Remove the 5 screws.

    2. Detach the 6 claws and remove the rear floor mat rear support plate.

  3. Click here

    REMOVE REAR FLOOR SERVICE HOLE COVER (for 3 Door)

    Tip:

    Fold back the floor mat so that the rear floor service hole cover can be removed.


    1. A01DRV5

      Remove the 3 screws and rear floor service hole cover.

  4. Click here

    REMOVE FUEL SENDER GAUGE ASSEMBLY (for 5 Door)


    1. A01DPXO

      Disconnect the fuel sender gauge connector.

    2. A01DML7E01

      Press down on the fuel sender gauge claw labeled A. Then slide the fuel sender gauge upward to remove it.

      Table 1. Text in Illustration
      A01DQPB Press down
      A01DMKT Slide
  5. Click here

    REMOVE FUEL SENDER GAUGE ASSEMBLY (for 3 Door)


    1. A01DU2N

      Disconnect the fuel sender gauge connector and fuel pump connector.

    2. Remove the 5 screws and fuel sender gauge.

    3. Remove the gasket from the fuel sender gauge.