Note
Do not disconnect the hoses indicated in the illustration.
| *A | for Single Tank Type | *B | for Double Tank Type |
REMOVE FUEL SENDER GAUGE ASSEMBLY (for Single Tank Type)
Disconnect the fuel sender gauge connector.
Press down on the fuel sender gauge claw labeled A. Then slide the fuel sender gauge upward to remove it.
|
Press down |
|
Slide |
REMOVE FUEL SENDER GAUGE ASSEMBLY (for Double Tank Type)
Disconnect the fuel sender gauge connector.
Press down on the fuel sender gauge claw labeled A. Then slide the fuel sender gauge upward to remove it.
|
Press down |
|
Slide |
REMOVE NO. 1 FUEL SUB-TANK (for Single Tank Type)
Disconnect the fuel pump connector.
| *1 | Jet Pump |
Disconnect the jet pump from the No. 1 fuel sub-tank.
Using a small screwdriver, detach the claw from the No. 1 fuel sub-tank.
Tech Tips
Tape the screwdriver tip before use.
Note
Do not damage the No. 1 fuel sub-tank.
Using a screwdriver, detach the 3 claws from the claw holes.
Tech Tips
Tape the screwdriver tip before use.
Note
Do not damage the No. 1 fuel sub-tank.
Using a screwdriver, detach the 3 claws from the claw holes.
Tech Tips
Tape the screwdriver tip before use.
Note
Do not damage the No. 1 fuel sub-tank.
REMOVE NO. 1 FUEL SUB-TANK (for Double Tank Type)
Disconnect the fuel pump connector.
| *1 | Jet Pump A |
| *2 | Jet Pump B |
Disconnect the jet pump labeled A from the No. 1 fuel sub-tank.
Disconnect the jet pump labeled B from the No. 1 fuel sub-tank.
Tech Tips
Tape the screwdriver tip before use.
Note
Do not damage the No. 1 fuel sub-tank.
Using a screwdriver, detach the 3 claws from the claw holes.
Tech Tips
Tape the screwdriver tip before use.
Note
Do not damage the No. 1 fuel sub-tank.
Using a screwdriver, detach the 3 claws from the claw holes.
Tech Tips
Tape the screwdriver tip before use.
Note
Do not damage the No. 1 fuel sub-tank.
REMOVE FUEL PUMP
| *A | for Single Tank Type |
| *B | for Double Tank Type |
Detach the fuel pump wire harness clamp.
| *1 | Fuel Filter Case |
Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the fuel filter case.
Tech Tips
Tape the screwdriver tip before use.
Disconnect the fuel pump wire harness connector from the fuel pump to remove it.
| *1 | O-Ring |
| *2 | Fuel Pump Spacer |
Remove the O-ring and fuel pump spacer from the fuel pump.
REMOVE FUEL SUCTION CAP
| *1 | Fuel Filter Case |
| *2 | O-Ring |
Remove the fuel suction cap from the fuel filter case.
Remove the O-ring from the fuel suction cap.