Click here

FUEL SENDER GAUGE ASSEMBLY INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. A01DMOKE01

      Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Float position is F (upper) 13.5 to 16.5 Ω
      Float position is E (lower) 405.5 to 414.5 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.

  2. Click here

    INSPECT FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)


    1. A01DTF5E01

      Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Float position is F (upper) 13.5 to 16.5 Ω
      Float position is E (lower) 405.5 to 414.5 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.