FUEL SENDER GAUGE ASSEMBLY (for Single Tank Type) INSPECTION


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY (for 5 Door)


    1. A01DMOKE01

      Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Float position is F (upper) 13.5 to 16.5 Ω
      Float position is E (lower) 405.5 to 414.5 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.

  2. INSPECT FUEL SENDER GAUGE ASSEMBLY (for 3 Door)


    1. A01DOSWE01

      Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 3 Float position is F (upper) 12 to 18 Ω
      Float position is E (lower) 405 to 415 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.