Click here

FUEL SUB TANK INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL FUEL TANK BREATHER HOSE


    1. Install the fuel tank breather hose to the fuel sub tank.

  2. Click here

    INSTALL FUEL TANK TO FILLER PIPE HOSE


    1. Install the fuel tank to filler pipe hose to the fuel sub tank.

  3. Click here

    INSTALL FUEL TANK VENT TUBE ASSEMBLY


    1. Install a new gasket and the fuel tank vent tube with the 8 screws.

      4.0 N*m 41 kgf*cm 35 in.*lbf

    2. Attach the wire harness clamp.

  4. Click here

    INSTALL FUEL SUB TANK SUB-ASSEMBLY


    1. Set the fuel sub tank on a transmission jack and lift up the transmission jack.

    2. Connect the 2 fuel tank bands with the 4 bolts.

      40 N*m 408 kgf*cm 30 ft.*lbf

    3. Connect the fuel sender gauge connector.

  5. Click here

    CONNECT FUEL TANK BREATHER HOSE


    1. Connect the fuel tank breather hose to the filler pipe.

  6. Click here

    CONNECT FUEL TANK TO FILLER PIPE HOSE


    1. Connect the fuel tank to filler pipe hose to the filler pipe.

  7. Click here

    CONNECT FUEL HOSE


    1. Connect the fuel evaporation hose, fuel breather hose and 3 fuel hoses.

  8. Click here

    INSTALL NO. 2 FUEL TANK PROTECTOR


    1. Install the No. 2 fuel tank protector with the 5 bolts.

      20 N*m 204 kgf*cm 15 ft.*lbf
  9. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  10. Click here

    BLEED AIR FROM FUEL SYSTEM


  11. Click here

    INSPECT FOR FUEL LEAK