INJECTOR DRIVER REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE INJECTOR DRIVER ASSEMBLY (w/o DPF)


    1. A01DMXG

      Disconnect the 3 connectors.

    2. Remove the 3 bolts and injector driver assembly.

  3. REMOVE INJECTOR DRIVER ASSEMBLY (w/ DPF)


    1. A01DS6O

      Disconnect the 4 connectors.

    2. Remove the 2 bolts and injector driver assembly.

  4. REMOVE INJECTOR DRIVER BRACKET


    1. A01DUP3E01
      Text in Illustration
      *A w/o DPF
      *B w/ DPF

      Remove the 3 screws and injector driver bracket.