Click here

FRONT CRANKSHAFT OIL SEAL REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE UPPER RADIATOR SUPPORT SEAL


    1. Remove the 13 clips and upper radiator support seal.

  2. Click here

    REMOVE RADIATOR RESERVOIR


    1. A01DSOG

      Disconnect the reservoir hose from the radiator.

    2. Remove the 3 bolts and radiator reservoir.

  3. Click here

    REMOVE FAN SHROUD


    1. A01DRXM

      Detach the claw to open the flexible hose clamp.

    2. A01DQMO

      Loosen the 4 nuts holding the fluid coupling fan.

    3. Remove the fan and generator V-belt (Click here).

    4. A01DRW2

      Remove the 2 bolts holding the fan shroud.

    5. Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.

      Note:

      Be careful not to damage the radiator core.

  4. Click here

    REMOVE CRANKSHAFT PULLEY


    1. A01DN29E02

      Using SST, hold the crankshaft pulley and loosen the pulley bolt until 2 or 3 threads are screwed into the crankshaft.

      09213-54015 91651-60855
      09330-00021
      Table 1. Text in Illustration
      *a Loosen
      *b Hold
    2. A01DQFHE02

      Using SST and the pulley bolt, remove the crankshaft pulley.

      09950-50013 09951-05010 09952-05010 09953-05010 09954-05021
      Table 2. Text in Illustration
      *a Loosen
      *b Hold
      Tip:

      Apply lubricant to the threads and end of SST.

  5. Click here

    REMOVE TIMING CHAIN COVER OIL SEAL


    1. A01DMKXE02

      Using a screwdriver, pry out the oil seal.

      Table 3. Text in Illustration
      *1 Protective Tape
      Tip:

      Tape the screwdriver tip before use.

      Note:

      • Do not damage the surface of the oil seal press fit hole or the crankshaft.

      • Check the crankshaft for damage after removing the oil seal. If the crankshaft is damaged, smooth the surface with 400-grit sandpaper.