FRONT CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE RADIATOR ASSEMBLY


    1. Remove the radiator Click here.

  2. DISCONNECT WATER BY-PASS PIPE SUB-ASSEMBLY (w/ Oil Cooler)


    1. A01DQDF

      Remove the 3 bolts.

    2. A01DSFQ

      Disconnect the 2 hoses and water by-pass pipe.

  3. REMOVE OIL FILTER BRACKET


    1. A01DPWNE01
      Text in Illustration
      *A w/ Oil Cooler
      *B w/o Oil Cooler

      Remove the 2 nuts, bolt, oil filter bracket and gasket.

  4. REMOVE CRANKSHAFT PULLEY


    1. A01DMJWE04

      Using SST, hold the crankshaft pulley and loosen the pulley bolt. Continue to loosen the bolt until only 2 or 3 threads are screwed into the crankshaft.

      SST
      09213-54015   ( 91651-60855 )
      09330-00021
    2. A01DMDHE02

      Using the pulley set bolt and SST, remove the crankshaft pulley and pulley bolt.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05031 )

  5. REMOVE FRONT CRANKSHAFT OIL SEAL


    1. A01DT1U

      Using a screwdriver, pry out the oil seal.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Do not damage the surface of the oil seal press fit hole or crankshaft.