FRONT CRANKSHAFT OIL SEAL INSTALLATION


  1. INSTALL FRONT CRANKSHAFT OIL SEAL


    1. A01DMPHE01

      Apply MP grease to the lip of a new oil seal.

    2. Using SST and a hammer, tap in the oil seal until its surface is flush with the timing chain cover edge.

      SST
      09226-10010

      Note


      • Keep the lip free from foreign matter.

      • Do not tap the oil seal at an angle.

  2. INSTALL CRANKSHAFT PULLEY


    1. A01DQVBE03

      Using SST, install the crankshaft pulley with the pulley set bolt.

      SST
      09213-54015   ( 91651-60855 )
      09330-00021
      Torque:
      260 N*m  { 2651 kgf*cm, 192 ft.*lbf }

  3. INSTALL OIL FILTER BRACKET


    1. Install the oil filter bracket and a new gasket with the 2 nuts and bolt.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  4. CONNECT WATER BY-PASS PIPE SUB-ASSEMBLY (w/ Oil Cooler)


    1. A01DLWME01
      Text in Illustration
      *1 Upward
      *2 Rearward

      Connect the 2 hoses and water by-pass pipe.

      Tech Tips

      The direction of the hose clamp is indicated in the illustration.

    2. Install the 3 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  5. INSTALL RADIATOR ASSEMBLY


    1. Install the radiator Click here.