IGNITION COIL AND SPARK PLUG INSTALLATION


  1. INSTALL SPARK PLUG


    1. Using a 16 mm spark plug wrench, install the 4 spark plugs.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  2. INSTALL IGNITION COIL ASSEMBLY


    1. Install the 4 ignition coils with the 4 bolts.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

    2. Connect the 4 ignition coil connectors.

  3. INSTALL INTAKE AIR CONNECTOR


    1. Install the intake air connector with the 3 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Tighten the hose clamp.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    3. Connect the vacuum hose.

    4. Attach the wire harness clamp.

    5. Connect the No. 2 ventilation hose.

    6. w/ Manifold absolute pressure sensor:


      1. Connect the vacuum hose.

      2. Attach the 2 clamps.

      3. Connect the air pressure sensor connector.

  4. INSTALL AIR CLEANER AND HOSE


    1. A01DM5YE01
      Text in Illustration
      *1 Matchmark
      *a Upper
      *b Front

      Install the air cleaner and hose, align its matchmark with the matchmark of the air cleaner cap as shown in the illustration.

    2. Tighten the hose clamp.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    3. Attach the 4 clamps.

    4. Attach the 3 clamps and connect the mass air flow meter connector.