CRANKSHAFT POSITION SENSOR REMOVAL


  1. REMOVE FAN SHROUD


    1. Remove the fan shroud Click here.

  2. DISCONNECT VANE PUMP ASSEMBLY


    1. A01DSXA

      Remove the bolt and disconnect the pressure feed tube.

    2. A01DQLI

      Disconnect the 2 connectors.

    3. Remove the 2 bolts and disconnect the vane pump.

      Tech Tips

      It is not necessary to completely remove the vane pump. With the hoses connected to the vane pump, hang the vane pump on the vehicle body with a rope.

  3. DISCONNECT COOLER COMPRESSOR ASSEMBLY


    1. A01DP3S

      Remove the bolt and disconnect the suction hose from the engine.

    2. A01DRJ9

      Disconnect the connector.

    3. Remove the 4 bolts and disconnect the cooler compressor.

      Tech Tips

      It is not necessary to completely remove the cooler compressor. With the hoses connected to the compressor, hang the compressor on the vehicle body with a rope.

  4. REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET


    1. A01DMUE

      Remove the 5 bolts and No. 1 compressor mounting bracket.

  5. REMOVE CRANKSHAFT POSITION SENSOR


    1. A01DR5A

      Disconnect the crankshaft position sensor connector and detach the wire harness clamp.

    2. A01DM14E02

      Remove the bolt and crankshaft position sensor.