ACCELERATOR PEDAL INSTALLATION


  1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY (for Automatic Transmission)

    Note


    • This accelerator pedal does not require lubrication.

      Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

      If applied, the accelerator pedal sensor assembly must be replaced.

    • Prevent physical shocks to the accelerator pedal.

    • Do not disassemble the accelerator pedal assembly.


    1. Install the accelerator pedal with the 3 nuts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    2. Connect the accelerator pedal connector.

  2. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY (for Manual Transmission)

    Note


    • This accelerator pedal does not require lubrication.

      Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

      If applied, the accelerator pedal sensor assembly must be replaced.

    • Prevent physical shocks to the accelerator pedal.

    • Do not disassemble the accelerator pedal assembly.


    1. Install the accelerator pedal with the 2 nuts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    2. Connect the accelerator pedal connector.

  3. INSTALL FRONT NO. 1 CONSOLE BOX INSERT


    1. Attach the 2 clips and guide to install the front No. 1 console box insert.

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Attach the 2 clips and 2 guides to install the No. 1 instrument panel under cover.

    2. Install the screw.