BLIND SPOT MONITOR SYSTEM, Diagnostic DTC:C1AB6

DTC Code DTC Name
C1AB6 Blind Spot Monitor Master Module

DESCRIPTION

This DTC is stored when the blind spot monitor sensor LH detects an internal malfunction.

DTC Code DTC Detection Condition Trouble Area
C1AB6 The blind spot monitor sensor LH (master) detects an internal malfunction. Blind spot monitor sensor LH

INSPECTION PROCEDURE

Note

When checking for DTCs, make sure that the blind spot monitor main switch assembly (multi-function switch) is on.

PROCEDURE


  1. CHECK DTC


    1. Clear the DTCs Click here.

    2. Recheck for DTCs and check if the same DTC is output again Click here.

      OK
      No DTCs are output.

    NG

    REPLACE BLIND SPOT MONITOR SENSOR LH Click here

    OK

    USE SIMULATION METHOD TO CHECK Click here