Click here

BLIND SPOT MONITOR SYSTEM, Diagnostic DTC:C1AB6

Click here
Click here Click here
DTC Code DTC Name
C1AB6 Blind Spot Monitor Master Module
Click here

DESCRIPTION

This DTC is stored when the blind spot monitor sensor LH detects an internal malfunction.

DTC Code DTC Detection Condition Trouble Area
C1AB6 The blind spot monitor sensor LH (master) detects an internal malfunction. Blind spot monitor sensor LH
Click here

INSPECTION PROCEDURE

Note:

When checking for DTCs, make sure that the blind spot monitor main switch assembly (multi-function switch) is on.

Click here

PROCEDURE


  1. Click here

    CHECK DTC


    1. Clear the DTCs (Click here).

    2. Recheck for DTCs and check if the same DTC is output again (Click here).

      OK
      No DTCs are output.

  2. Click here

    USE SIMULATION METHOD TO CHECKClick here

  3. Click here

    REPLACE BLIND SPOT MONITOR SENSOR LHClick here