Click here

BLIND SPOT MONITOR SYSTEM TERMINALS OF ECU

Click here
Click here Click here
Click here
  1. A01DOD7E11

    BLIND SPOT MONITOR SENSOR LH (MASTER)

    Terminal No.

    (Symbol)

    		 Wiring Color Terminal Description Condition Specified Condition
    R42-4 (OMIL) - R42-10 (BLGD) B - W-B Outer rear view mirror indicator power source signal LH Outer rear view mirror indicator illuminated 2.5 to 7.5 V
    Outer rear view mirror indicator not illuminated Below 1 V
    R42-5 (BLB) - R42-10 (BLGD) GR - W-B IG power source signal Engine switch off Below 1 V
    Engine switch on (IG) 11 to 14 V
    R42-10 (BLGD) - Body Ground W-B - Body ground Ground Always Below 1 V
  2. A01DOD7E12

    BLIND SPOT MONITOR SENSOR RH (SLAVE)

    Terminal No.

    (Symbol)

    		 Wiring Color Terminal Description Condition Specified Condition
    R43-3 (BUZ) - R43-10 (BRGD)*1 SB - W-B RCTA buzzer (blind spot monitor buzzer) operation signal RCTA buzzer (blind spot monitor buzzer) not sounding 11 to 14 V
    Outer rear view mirror indicator blinks Alternating between 0 to 7.5 V
    RCTA buzzer (blind spot monitor buzzer) sounding Alternating between 0 to 14 V
    R43-4 (OMIR) - R43-10 (BRGD) L - W-B Outer rear view mirror indicator power source signal RH Outer rear view mirror indicator illuminated 2.5 to 7.5 V
    Outer rear view mirror indicator blinks Alternating between 0 to 7.5 V
    Outer rear view mirror indicator not illuminated Below 1 V
    R43-5 (BRB) - R43-10 (BRGD) GR - W-B IG power source signal Engine switch off Below 1 V
    Engine switch on (IG) 11 to 14 V
    R43-8 (SPR) - R43-10 (BRGD)*2 R - W-B Reverse signal Engine switch on (IG), shift lever in R 11 to 14 V
    Engine switch on (IG), shift lever not in R Below 1 V
    R43-10 (BRGD) - Body Ground W-B - Body ground Ground Always Below 1 V

    • *1: w/ RCTA

    • *2: for Manual Transmission