Click here

PARKING ASSIST MONITOR SYSTEM (w/o Side Monitor System) INITIALIZATION

Click here
Click here Click here
Click here

  1. INITIALIZE PARKING ASSIST MONITOR SYSTEM


    1. When "System initializing" is displayed on the navigation receiver assembly, correct the steering angle neutral point using the following method.


      1. Fully turn the steering wheel to the right and left on flat ground.

        Note:

        Memorizing the steering angle neutral point must be carried out with the engine started. Apply the parking brake, depress the brake pedal, check that the shift lever is in P, and ensure that the vehicle is not moving.

        Tip:

        • The "?" button is displayed at the same time as "System initializing". If the "?" button is selected, this method is displayed.

        • If the steering angle neutral point cannot be memorized by fully turning the steering wheel to the right and left, perform Steering Angle Setting in Calibration (Click here).