PARKING ASSIST MONITOR SYSTEM (w/ Side Monitor System) DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Chassis / Parking Assist Monitor System / DTC.

    5. Check the details of the DTCs Click here.

      Tech Tips

      The parking assist ECU may store the DTCs of the following system. If DTCs other than those specified in Diagnostic Trouble Code Chart of the parking assist monitor system are output, refer to Diagnostic Trouble Code Chart for the applicable system.

      System Proceed to
      Side Monitor System

      Click here

      Wide View Front Monitor System

      Click here

  2. CLEAR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Chassis / Parking Assist Monitor System / DTC.

    5. According to the display on the GTS, select the trouble code data display with the clear button.