TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/ Multi-display) CUSTOMIZE PARAMETERS


  1. CUSTOMIZE TOYOTA PARKING ASSIST-SENSOR SYSTEM

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Clearance Sonar / Warning, Sensor or Display.

      5. Select the setting by referring to the table below.

        Warning
        Display Default Content Setting Relevant ECU
        Rr Sensor Onset Range Wide Set the buzzer activation range for the rear center sensors.

        Narrow or Wide


        • Narrow: 650 mm (25.6 in.)

        • Wide: 1500 mm (59.1 in.)

        		 Clearance warning ECU
        Fr Sensor Onset Range Wide Set the buzzer activation range for the front center sensors.

        Narrow or Wide


        • Narrow: 600 mm (23.6 in.)

        • Wide: 1000 mm (39.4 in.)

        		 Clearance warning ECU
        Keep Sense Buzzer Avail Make the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds.

        Not Avail or Avail


        • Not Avail: Not Available

        • Avail: Available

        		 Clearance warning ECU
        Fr & Rr Buzzer Volume M2 Change the buzzer volume setting.

        L, M1, M2, M3 or H


        • L: Low volume

        • M1: Medium low volume

        • M2: Medium volume

        • M3: Medium high volume

        • H: High volume

        		 Clearance warning ECU
        Sensor Condition N Avail Make the front sensors available when the shift lever is in N.

        Not Avail or Avail


        • Not Avail: Not Available

        • Avail: Available

        		 Clearance warning ECU
        Reverse Range Front Sensor Fcrn Change the operation setting for the front sensors when the shift lever is in R.

        F, Fcrn or F Stop


        • F: Front sensors are available

        • Fcrn: Front corner sensors are available

        • F Stop: Front sensors are not available

        		 Clearance warning ECU
        Non P/R Range Rear Sensor R Stop Change the operation setting for the rear sensors when the shift lever is in any position except P or R.

        R, Rcrn or R Stop


        • R: All rear sensors are available

        • Rcrn: Rear corner sensors are available

        • R Stop: All rear sensors are not available

        		 Clearance warning ECU
        Display Mode All Change the display mode setting (when the TOYOTA parking assist-sensor system is normal). All or Undisp Clearance warning ECU

    2. Customizing with Multi-display


      1. Turn the engine switch on (IG).

      2. Enter the following menus: Setup / Vehicle / TOYOTA Park Assist.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant
        Alert volume 3 Change the buzzer volume setting.

        1, 2, 3, 4 or 5


        • 1: Low volume

        • 2: Medium low volume

        • 3: Medium volume

        • 4: Medium high volume

        • 5: High volume

        		 Clearance warning ECU
        Display On Change the display mode setting (when the TOYOTA parking assist-sensor system is normal). On or Off Clearance warning ECU
        Distance Wide Set the buzzer activation range for the front center sensors.

        Narrow or Wide


        • Narrow: 600 mm (23.6 in.)

        • Wide: 1000 mm (39.4 in.)

        		 Clearance warning ECU
        Set the buzzer activation range for the rear center sensors.

        Narrow or Wide


        • Narrow: 650 mm (25.6 in.)

        • Wide: 1500 mm (59.1 in.)

        		 Clearance warning ECU