DESCRIPTION
The No. 1 ultrasonic sensor (front corner sensor LH) is installed on the front bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (front corner sensor LH). If the No. 1 ultrasonic sensor (front corner sensor LH) has an open or other malfunction, it will not function normally.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1AE1 | A malfunction of the No. 1 ultrasonic sensor (front corner sensor LH). |
|
INSPECTION PROCEDURE
Note
If the DTC is output after repairs, turn the engine switch on (IG) and turn the TOYOTA parking assist-sensor system on. Then clear the DTC Click here.
PROCEDURE
CHECK FOR DTC
Check for DTCs Click here.
| Result | Proceed to |
|---|---|
| No DTC is output | A |
| Only DTC C1AE1 is output | B |
| DTC C1AE1 and C1AEC are output | C |
| B |
|
REPLACE NO. 1 ULTRASONIC SENSOR (FRONT CORNER SENSOR LH) Click here |
| C |
|
GO TO DTC (C1AEC) Click here |
| A |
|
USE SIMULATION METHOD TO CHECK Click here
REPLACE NO. 1 ULTRASONIC SENSOR (FRONT CORNER SENSOR LH)
Replace the No. 1 ultrasonic sensor (front corner sensor LH) with a normally functioning sensor Click here.
Tech Tips
All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a known good sensor from the other end of the vehicle.
| NEXT |
|
CHECK FOR DTC
Clear the DTCs Click here.
Check for DTCs Click here.
| Result | Proceed to |
|---|---|
| No DTC is output | A |
| DTC C1AE1 is output (for LHD) | B |
| DTC C1AE1 is output (for RHD) | C |
| B |
|
REPLACE CLEARANCE WARNING ECU Click here |
| C |
|
REPLACE CLEARANCE WARNING ECU Click here |
| A |
|
END (NO. 1 ULTRASONIC SENSOR WAS DEFECTIVE)