NAVIGATION SYSTEM (for Built-in Memory) Cellular Phone cannot Make Outgoing/Incoming Calls

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK "Bluetooth" SETTINGS


    1. Check if the cellular phone is registered as a connected device and the "Bluetooth" settings are correct.

      OK
      The cellular phone is registered as a connected device and "Bluetooth" settings are correct.

    NG
    OK
  2. CHECK SETTINGS AND CONDITIONS


    1. Check the cellular phone functions.

      Tech Tips

      The cellular phone is unable to call under any of the following conditions:


      • The cellular phone is locked.

      • The directory is being transferred.

      • The line is crossed.

      • The cellular phone is outside service range.

      • The power is off.

      • The battery is low.

      • The cellular phone is not connected via "Bluetooth".

        OK
        None of the above conditions exist.

    NG
    OK
  3. CHECK RECEPTION


    1. Place the cellular phone close to the navigation receiver assembly.

    2. Set the cellular phone so that it can receive calls.

    3. Check if the cellular phone has reception according to the navigation receiver assembly.

      OK
      The cellular phone has reception.

    NG
    OK
  4. CHECK CELLULAR PHONE


    1. Check if the cellular phone can make a call.

      Tech Tips

      The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.

      OK
      Cellular phone can make a call.

    NG
    OK
  5. RESTART CELLULAR PHONE


    1. Restart the cellular phone.

    2. Register the cellular phone as a connected device again and check that the malfunction disappears.

      OK
      Malfunction disappears.

    NG
    OK
  6. CHECK CELLULAR PHONE


    1. Check if the cellular phone is "Bluetooth" compatible.

      Tech Tips

      Some versions of "Bluetooth" compatible cellular phones may not function.

      OK
      The phone is "Bluetooth" compatible.

    NG
    OK